Hi. First off, great thread!
However, i will be very interested to see how well that manifold for your bike bodies fits. I spent a while over summer (when i was bored) designing a inlet mani for our type heads (Spacing more or less 0-0-0-0).
My design uses the standard injectors, as they go into the head. But they caused me a bit of a space issue as it was quite hard to get a manifold design that would not foul the electronic injector rail and the engine mount nearest the drivers side.
If you have had to move anything or change the engine mount could you let me know?
I will be watching this thread with lots of interest!
Alex
|