Quote:
Originally Posted by AJ-K
this was in the "spotted section" the other day mate. i commented saying it was chips baby. was dirty in the pic. i was always jealous of the shine of your car. i always thought the pictures were fake  you can come clean mine like that if you get bored? 
btw as im on your thread and saw the piccys above could you remember and tell me the sizes etc. of your blue hoses connecting the bmc on??? i need to fit mine and you telling my the sizes will saveee me time mate.
cheeers aj. |
Just going to check my ebay records pal, will edit this post in a second :Y: I've replied to that thread
EDIT: Right, it's a 70mm x 60mm reducer coming off the throttle body with a 70mm joiner between that and the elbow. Elbow is 70mm to fit the Simota. Then the cold air feed had a 70mm elbow. Then to reduce the elbow iirc i used a 67mm x 54mm end feed copper reducer (plumbing fitting haha) and then a straight piece of 55mm silicone to connect to the original piece on the slam panel.
The copper fitting is stuff i sell at work plus copper will stand high temperature's easy which is why i used that. You have to chop the elbow's about a bit iirc to get it all to fit right but it's pretty straight forward.