Saxperience - Citroen Saxo Forum - View Single Post - JP's 220+bhp NA 16v Mango Westcoast

jpsaxo · 15th March 2011, 18:37

Managed to get the servo painted and back on this afternoon (what a bastard!),

Also got the alternator bracket off, cleaned up the pullies (as they were a bit rusty due to it sitting for long periods) and the main pully at the bottom of the engine to check it was all good.

Next is to put the 23mm MC on and bleed up the brakes, make sure everythings working, and then tidy up the bay and put it all back together. Should be done by Sunday

15th March 2011, 18:37	#468
jpsaxo Saxperience Post Whore Join Date: Oct 2005 Location: Sydney Posts: 8,525 Car(s): Mango Westcoast iTrader Score: 11 (100%)	Managed to get the servo painted and back on this afternoon (what a bastard!), Also got the alternator bracket off, cleaned up the pullies (as they were a bit rusty due to it sitting for long periods) and the main pully at the bottom of the engine to check it was all good. Next is to put the 23mm MC on and bleed up the brakes, make sure everythings working, and then tidy up the bay and put it all back together. Should be done by Sunday __________________ PFC Featured Mango 16v 220+bhp Sandy Brown engine'd Westcoast My 2015 Project thread ---> http://www.saxperience.com/forum/sho...202333&page=45 Last edited by jpsaxo; 15th March 2011 at 18:40.