View Single Post
Old 19th May 2011, 19:27   #545
Mikol
Established Member
Track / Motorsport PrepCentral Counties Region MemberEast Anglia Region Member
 
Mikol's Avatar
 
Join Date: Jun 2008
Location: Somewhere between Bedford and Brixworth
Posts: 2,373
Car(s): 106 XS 16v Driveway Ornament
iTrader Score: 12 (100%)
Mikol is on a distinguished road
Default

As promised, 3 stud 266mm brakes. These are my second set now running Lucas calipers with OEM disc retaining screws into countersunk holes in the discs. My original set were BOSCH calipers with no retainers.



You can also see the stud conversion with anodised black wheel nuts (which Is why I questioned Alex's post above, there's a few of us running studs & nuts nowadays)



The eagle-eyed will notice the struts are actually VT* struts, no 3 studs ever came with drop-links. I had to combine some very special 3 stud hubs with the correct bearings to get them to fit in the 4 stud sporty Saxo hub.





Booyah!

A couple more boring things...

Meshed OEM grille - These are already meshed but only a circular cut-out actually lets air in. So I cut out the old stuff and meshed the lot... and had it sprayed gloss black.



And also I wired a permanent USB charger into the ciggy lighter, with a switch next to it



Think that's it, I'll post up if I come across any more.
__________________
White 106 1.6 XS 16v - 106oc Flat Arch of the Year 2012
Cobalt 106 1.1 - 106oc Flat Arch of the Year 2010

Last edited by Mikol; 19th May 2011 at 19:33.
Mikol is offline   Reply With Quote