Still having isues! anyone any ideas after this lot?
have now added an earth from the gearbox to the chassis, and tested the battery which is apparently fine?!
few queries that i may have got wrong?!
there are two threaded fitting on the starter motor..... a large with a 13mm nut and a smaller thread with an 8mm nut.
i have put the lines from battery to starter, starter to alternator, and starter to fuse box all on the larger thread with the 13mm nut. IS THIS CORRECT?
then the only fitting on the 8mm nut is the original connector from the loom......
there are a few plugs which i also havent got plugged in, brown plug next to the inertia switch? And this 2 pin plug close to the inertia also see here.....
