Quote:
Originally Posted by dj_enzo
your right tho mate as the vtr block and vts block are the same its the head and the pistons that are different
|
the block are near identical to each other , the only difference is an breather hole on the block which is missing on the VTR block.. now you can try to drill this hole i think its around 12mm but the block will crack when you get near the size needed..
also thing with 2nd hand blocks is there normally high mileage engines and there will be a lip on the cylinder wall which will reduce engine output power, so it will have to re-bored & honed to get rid of this and depending how much it has to be bored by you may have to get oversized rings or pistons.. which all adds up alot more then £50..