Picasso 1.6 8V box and O/S shaft with bearing carrier and speedo drive
Above driveshaft to be shortened to 330mm
Make gearbox mounts
Clutch fork lever & cable bracket from Berlingo/Partner (2151 90 and 211758)
Gear lever from BE1 or BE3
306 1.8 16v N/S driveshaft
Later 106 wheel bearings
306 hub drive plates machined to 37mm
Firstline FKC 1078 clutch cable
Later crank sensor/plug
BE release bearing (to suit stock clutch) pug part no: 20.41A7
Does that sound about right?
|