Saxperience - Citroen Saxo Forum - View Single Post - handbrake light stays on after ABS removal

tarzan · 7th August 2015, 17:33

hi guys

my vts handbrake light wont turn off. ive disconnected both the brake fluid level sensor and hand brake lever sensor and checked their operation and they work fine. i even connected a empty reservoir i had laying around. still the light stays on. i checked the voltages on both. the handbrake lever voltage is around 0.4v and the reservoir voltage is 12v???? on my 106 the voltage is fairly low in the reservoir.

wires must be crossed somewhere but its hard to trace them back and espicially when the circuit runs thru the clocks

also ABS was completely removed if that has anything to do with it somehow

if anyone has any info please share

7th August 2015, 17:33	#1
tarzan Frequent Poster Join Date: Apr 2010 Location: Lurgan Posts: 767 Car(s): 2001 black saxo furio 2001 black saxo vts	handbrake light stays on after ABS removal hi guys my vts handbrake light wont turn off. ive disconnected both the brake fluid level sensor and hand brake lever sensor and checked their operation and they work fine. i even connected a empty reservoir i had laying around. still the light stays on. i checked the voltages on both. the handbrake lever voltage is around 0.4v and the reservoir voltage is 12v???? on my 106 the voltage is fairly low in the reservoir. wires must be crossed somewhere but its hard to trace them back and espicially when the circuit runs thru the clocks also ABS was completely removed if that has anything to do with it somehow if anyone has any info please share Last edited by tarzan; 7th August 2015 at 21:27.