Quote:
Originally Posted by nuttysaxo
Hello mate , I have got a new mintex rear brake kit to go on soon , going to go big spend on this ! lol , I saw a servo going cheap VTS / VTR it does not matter all should fit onto the master cylinder and pipe work without altering anything else ? .. I'm replacing the axle too soon for MOT its starting to go , do you know where I can find new mounting bushes for axle to car body I assume there must be something under where it bolts under rear seats .. cheers for your help  |
Yes all the servos are interchangeable. They're a massive pain to change though, the bolts are on the back.
You can use a bigger master cylinder on the original servo. That's how I have it set on my 1.1 turbo.
Yes, you'll be able to get poly bushes and even solid plastic metal ones from the usual places that sell performance 106 parts. Spoox have a big selection of different bush types
https://spoox.co.uk/567-rear-suspens...derway=asc&p=3 or try Pug1off. Can even get bushes on eBay etc if you want cheaper ones.
Only thing to watch out for, is there are 2 types M10 and M12. You will need M12.