Quote:
Originally Posted by henryvtr
I have 350cc in my vtr with a fuel reg of 3 bar, my mapper says they are comfortable at 200 and have scope (may include upping fuel reg) upto 300hp easy,
whoever makes the injectors should have a data sheet online that will tell you there flow rate at 3bar, if you can find it.
|
Renault won't likely have the data for the injectors, or at least they won't make it readily available. The static flow rate ('KRKTE' in Bosch ECUs) and latency ('TVUB' in Bosch ECUs) could be read from the ECU file though, if you knew where it was within the Megane file.
350cc/min won't make 300hp without going to at least 4.5 bar differential fuel pressure.
But they are no doubt more than big enough for a turbo VTR.