Quote:
Originally Posted by Chipwizards
No. It absolutely must have the grey plug coil because it is wired differently for phase detection.
Wires are:-
1 Cyl 1&4 from ECU
2 Cyl 2&3 from ECU
3 Phase signal to ECU
4 Power supply to Coil
You've got a three plug ECU which does sequential injection and uses the coil voltage deflection to determine phase. Sometimes the fault code is described as 'Cam sensor fault', even though they don't have a cam sensor.
|
Thank you,this might well be my problem because I've re-wired the coilpack plug with the pins described in my previous post so it's wired wrong,so it should be this way:
Grey 1:Cyl 1-4
Pink 2: Cyl 2-3
Orange 3: Phase ECU
Green 4: 12v feed
I will swap the wires around tomorrow and see how it runs, thank you!