Quote:
Originally Posted by The_Notorious_C_A_T
-
To bleed the brakes you have to start at the furthest away from the master cylinder, so when looking at car, start with back left, then back right, then front left and finally front right.
-Bleeding is just a case of undo the bleed nipple on the caliper that you want to bleed and pump the brake pedal until a steady stream of fluid comes out. Note that you should only have 1 bleed nipple open at a time, don't bleed one caliper while having another calipers bleed nipple open.
|
Just to specifi this abit more... You have to pump until the new liqiud comes out. Then you pump one last time hold the pedal to the floor and close the bleeding valve, if you let go it will pull air back inside. So basicly you would have to get someone to help you with this.
And remeber to keep an eye on the resovouir level if it runs dry you get air in the system.