I'm aware the 1.6 engine uses a 200mm clutch, however I'm running a 180мм flywheel so I need the 180mm kit. The previous 180mm clutch worked fine, made no noise but was slipping due to wear (used the old clutch from the 1.0 engine). The release bearing, friction disk and pressure plate came as a kit, so I doubt there is misalignment there.
The clutch feels and works fine, doesn't slip under power.
Today I found if I release the clutch pedal sharply the noise quiets significantly. Looks like I'll have to poke around the inspection holes and see if the darn thing has become misaligned.
Really don't want to take the box off again...
