[Lew_C]

Originally Posted by scottyboy553

dont worry m8,there a piece of p#ss,i replaced mine other day in my track car as it packed up,there is no need to take the whole dash out,i just removed the steering wheel and dials,removed the drivers side vent,remove wipers and wiper motor and undo the 2 10mm nuts that hold blower moter in place,back in car remove the bit of material thats above the pedals so u can reach up under the dash,pull off the plastic air duct that goes to the drivers side vent and remove from behind the dash,you now will be able to see the blower motor through the hole where your wheel and dials used to be,reach up under the dash and wiggle the bolts on the motor out of bulk head.Twist it on its side and work it down and pull it out from under the dash in footwell above pedals,just make sure you move any wires out off way and its a doddle.Took me 30 mins.hope this info is usefull.

Top notch mate! thanks a bunch