Replaced the original vts thottle body 52mm with the clio rs 60mm one,at more or less the same time i also did the conversion to single plug ecu as the 3 plug is not compatible with the different type of potentiometer the clio uses,did try to make it work but realized the only proper way was to switch to the older style ecu:
Idle control,it works more or less,it's a universal part i was able to adapt:
Then my chassis leg decided to split as it does:
Then finally the intake of my dreams turned up for sale,best intake you can ever fit to this,only inferior to itbs of course,they are from a S1600 206 cup car,not straight fit,chassis need to be cut and a few other clearences issues are present but all worth it in the end.
Comparison with the c2 inlet:
Injectors sits a bit further back but no issues there:
c2 measures 41mm x 28mm.
S1600 46mm x 32mm.
i opened up the gasket as well,before:
Weight,c2:
Before:
