Great guide.
Fitted mine last week and everything now working - locks, flashing LED and hazards. Did have a problem initially though and thought I'd done something wrong. Turns out the Hawk unit was faulty and had to be returned to Hawk. They were very good and helpful. Sent out a new one. Replacement unit was fine.
A couple of things that may help . . .
I tapped in to the wiring at the back of the hazard lights switch in the dash and also fitted the LED into one of the spare blanks in the same row.
To do this, I didn't need to remove the centre console etc etc. I took the glove box out and dropped it down from behind. Also removed the alluminium plate that has two support screws for the rear of the box. The plate just slides out of its mount. I then had easy access to the switch panel on the dash to fit the LED and tap in for the hazard wiring. Take out all the blanks in the switch panel
Dumfy
|