Quote:
Originally Posted by axsaxoman
quite simple
presuming the std fuel reg is NOT on the tank ,as later cars are
then all you need to do is make rubber fuel hoses from the connectors on t/bodies and get a couple of old snap on connectors from another saxo/ 106 --
and make push on rubber fuel hoses and fix with REAL fuel line clips and using std push on connectors
saxo,s have short plastic hoses that go from bulkhead to fuel rail --use then to make up your adaptor hoses
|
Cheers John
The regulator is on the fuel rail, so that's not an issue
Just to make sure I get it right, I take an old fuel rail and cut the plastic clips off and use them to make a connector so I can attach the fuel hose?
Sendt fra min SM-G920F med Tapatalk