Running woes
After having initial issues getting my VTS to start due to the little yellow plug being missing from the fuse box in the engine I finally got the car fired up today!
However, I'm still having issues, the car will tick over quite happily, but when I load the engine by moving forward, it cuts out and then won't re-start (fuel level is sufficient for the light not to be on.)
If I remove the vacuum pipe from the brake servo (I'm sure this isn't related to the issue,) and leave the car for a short while it will start again, but will cut out when trying to drive the car.
I have removed the charcoal cannister from the wing, the pipe to it from the tank is currently venting to atmosphere, and the inlet on the inlet manifold is currently blocked up (have also had the issue with it unblocked)
Any ideas?
I'm going to try swapping the injectors tomorrow to see if that makes any difference.
__________________
Hill Climb / Rally Car Project Thread
Quote:
Originally Posted by Gandi699
Put a photo of yourself up so we can all recognise you when you are on police interceptors or traffic cops
|
|
Threaded Mode