slopy gear stick

[saxochris1975]

hi guys ive a problem with my 02 plate 1.6 vts it drives fine all the gears work but the gear stick is very slopy any ideas i was thinking its the gear change rods are worn out if so is it an easy job to do ????

[mlawlan69]

i would ask the misses why it's sloppy first

[rumble291]

Gearbox roll pin most probably. Same problem as me and a friend both changed this pin and its stopped most of the play


(Pic from http://www.saxperience.com/forum/sho...d.php?t=339820)

Go Citroen garage and get a new pin (Part number C250924)

[DannnyBoi]

Originally Posted by rumble291

Gearbox roll pin most probably. Same problem as me and a friend both changed this pin and its stopped most of the play


(Pic from http://www.saxperience.com/forum/sho...d.php?t=339820)

Go Citroen garage and get a new pin (Part number C250924)

Yep this prob is your problem, New pin in 30p from Pugeot

[Bedford126]

can be 4 different causes for it mate not just the roll pin.

roll pil as stated above 30p from citroen /peugeot part no:- C250924

worn or bent linkages.
2 of http://www.106parts.co.uk/s2/page1.p...4=55&part=7658 and 1 of http://www.<br /> <br /> 106parts....4=55&part=7657

worn nylon selector ball:- http://www.106parts.co.uk/s2/page1.p...4=55&part=8757

worn out nylon pivot bushes (on the bottom of the stick) 2 x part no:- 245052

If you replace the whole lot your stick will be rock solid with no slop at all.

[Claki]

better get the missus down the garage for a service then! ive had enough of all the slop.