Saxo Brakes / Suspension / Transmission / Tyres If you have queries or information to share regarding Saxo braking, suspension, tyres or transmission systems, please discuss this within this forum. |
|
2nd October 2021, 09:35
|
#1
|
Newbie
Join Date: Jan 2021
Posts: 20
|
Anyone used J&R driveshafts recently?
This company has the cheapest new driveshafts I can find, and they actually come recommended by someone I know who has them fitted to a 106 and years later hasn't had an issue.
However looking at their general feedback, there are plenty of people complaining about poor quality parts with shafts snapping or boots failing after only a few hundred miles!
Has anyone put them on a saxo recently and can comment?
|
|
|
3rd October 2021, 09:03
|
#2
|
Infrequent Poster
Join Date: Mar 2018
Location: Wirral
Posts: 151
Car(s): 106 GTI -
106 GTI shell -
New 106 Rallye shell
|
I personally haven’t had experience of the J&R shafts but I know 2 people that have 106 Gti’s and had issues within a couple of months and poor customer service afterwards, obviously their must be loads more out there that are fine.
I’ve just bought the spoox racing development (heavy duty) shafts with the updated 6 ball outer CV for £110 each but depending on what your doing with the car this option may not be the most cost effective.
__________________
"If you haven't crashed your not driving fast enough"
|
|
|
4th October 2021, 12:19
|
#3
|
Newbie
Join Date: Jan 2021
Posts: 20
|
Yeah mine’s only a 1.1 and I wouldn’t need anything racing-spec, but it looks like GSF has some name-brand ones which are like £15 more per shaft, so might just go with them. Don’t fancy one breaking on me, since I need the car daily!
|
|
|
4th October 2021, 14:38
|
#4
|
Established Member
Join Date: Aug 2012
Posts: 2,009
Car(s): Saxò VTS 16v
|
I bought two of them,driver side and passenger side,fitted at different times,both of them failed after 1 trackday open pit lane (Saxo VTS 166hp,ns2r tyres,standard gearbox),the bearings inside had massive play in them.
|
|
|
11th October 2021, 20:46
|
#5
|
Saxperience Post Whore
Join Date: Jul 2010
Location: Morley, Leeds
Posts: 8,469
Car(s): Civic ep3 type r powered by TDI NORTH
|
9 out of 10 times brand new drive shafts fail because they’re packed with shit cheap grease and not enough of it from the start. I’ve never fit a new drive shaft without fully packing the boot and rea sealing with a new clip
__________________
|
|
|
13th October 2021, 16:08
|
#6
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
to contradict what's been mentioned.
I'm using 2 J&R driveshafts "for a 1.1" on my 16v engine, I've used it in sprints, came 1st in class and still haven't broken one. they've been on the car since 2017.
__________________
The rain kept a trollin'
|
|
|
24th November 2021, 15:26
|
#7
|
Newbie
Join Date: Jan 2021
Posts: 20
|
Thanks for replies everyone, I think I'll go for a set from GSF instead, just to be sure. It's not too much pricier anyway.
When I search there, I get multiple results for shafts of different sizes (e.g. 650 or 627mm for the left, and 805 or 809mm for the right) - does anyone know how to tell which I need? This is for a 2002 car with 1.1 engine. Can send my reg as well if it helps.
Looking on Euro car parts, they only offer one option for each (627 for left and 809 for right) so maybe that's right?
Cheers!
|
|
|
25th November 2021, 11:34
|
#8
|
Saxperience Forum Bum
Join Date: Jul 2010
Location: South Wales
Posts: 3,074
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
|
look at the date range for the parts, you have early and late type wheel bearings and drive flanges, with appropriate cv joint differences, I don't recall the crossover point but a 2002 should be well into late type.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 17:31.
|