Saxo Brakes / Suspension / Transmission / Tyres If you have queries or information to share regarding Saxo braking, suspension, tyres or transmission systems, please discuss this within this forum. |
![Reply](images/buttons/reply.gif) |
|
15th November 2018, 22:09
|
#1
|
Newbie
Join Date: Nov 2018
Posts: 2
|
Rear Axle
Hi,
Any one know were i can get a new set of rear axle bolts from, the ones that hold the axle to the car, its for an 02 vtr
Thx matt
|
|
|
16th November 2018, 17:53
|
#2
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
They're just M12x1.75 pitch bolts. nothing fancy.
ebay?
__________________
The rain kept a trollin'
|
|
|
10th December 2018, 07:03
|
#3
|
L-plater
Join Date: Sep 2018
Posts: 95
|
Does anyone know what are the dimensions of axle ID and OD?
|
|
|
20th December 2018, 20:32
|
#4
|
Infrequent Poster
Join Date: Mar 2018
Location: Wirral
Posts: 151
Car(s): 106 GTI -
106 GTI shell -
New 106 Rallye shell
|
Strange question
__________________
"If you haven't crashed your not driving fast enough"
|
|
|
20th December 2018, 23:14
|
#5
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by karl_mh
Strange question ![Wacko](../images/emoticons/wacko.gif)
|
Not if you want to make your own bearings.
I used to know what the sizes were for making oilite bearings, but no idea where the info is now. it was on 106owners but that's long gone now.
someone is bound to know
__________________
The rain kept a trollin'
|
|
|
20th December 2018, 23:23
|
#6
|
Infrequent Poster
Join Date: Mar 2018
Location: Wirral
Posts: 151
Car(s): 106 GTI -
106 GTI shell -
New 106 Rallye shell
|
Oillite bushes!! Not played with those for a long time. I assume that the needle roller bearings would be replaced by the oillite bushes giving a heavier duty low maintenance solution.
Sent from my iPhone using Tapatalk
__________________
"If you haven't crashed your not driving fast enough"
|
|
|
21st December 2018, 00:27
|
#7
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by karl_mh
Oillite bushes!! Not played with those for a long time. I assume that the needle roller bearings would be replaced by the oillite bushes giving a heavier duty low maintenance solution.
Sent from my iPhone using Tapatalk
|
Yes but by design they will have a bit of play, which some MOT testers decide to fail, not recommended for road use.
That play is absolutely safe and is more suited to track use.
There's more movement with a standard bearing, but you can't "feel" any play.
Needle rollers ftw!
__________________
The rain kept a trollin'
|
|
|
21st December 2018, 13:37
|
#8
|
L-plater
Join Date: Sep 2018
Posts: 95
|
Quote:
Originally Posted by karl_mh
Strange question ![Wacko](../images/emoticons/wacko.gif)
|
I want to make puller extractor tool for axle, so that's why I need this information.
I thought that there is only one type of axle Saxo/Peugeot 106 but after little research I found out that there are more then just one variant for bearing repair kit and axle
http://www.marxxon.com/peugeot-rear-...ment·Bush.html
http://www.marxxon.com/peugeot-rear-...·Axe-Tube.html
not shown here but there are also two lengths for axle 216mm and 226mm.
Can someone please confirm, what OEM do I need
VIN VF7S0HFXB57401680
|
|
|
21st December 2018, 14:00
|
#9
|
Infrequent Poster
Join Date: Mar 2018
Location: Wirral
Posts: 151
Car(s): 106 GTI -
106 GTI shell -
New 106 Rallye shell
|
I had a quick look on Servicebox using your VIN but only seems to show the trailing arms as a whole plus bearings and seals unless i'm missing something, with my Servicebox permissions this is all it seems to give me.
__________________
"If you haven't crashed your not driving fast enough"
|
|
|
21st December 2018, 14:37
|
#11
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
You will need nearly 20 tonnes to break the pin free from the axle.
It might move with less if you use lots and lots of heat.
Sent from my SM-A500FU using Tapatalk
__________________
The rain kept a trollin'
|
|
|
21st December 2018, 20:18
|
#12
|
L-plater
Join Date: Sep 2018
Posts: 95
|
I never knew there is a pin, but I do know it takes about 20t to pull the axle. Can you show me where exactly is this pin?
|
|
|
22nd December 2018, 00:28
|
#13
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by Alexa
I never knew there is a pin, but I do know it takes about 20t to pull the axle. Can you show me where exactly is this pin?
|
No there is no pin, we call the axle tube the axle pin.
It's press fit
I suggest you try some kind of hydraulic puller?
I'm still not sure of the dimensions of the pin/tube though. I don't have a spare axle to measure
__________________
The rain kept a trollin'
|
|
|
22nd December 2018, 16:01
|
#14
|
L-plater
Join Date: Sep 2018
Posts: 95
|
Quote:
Originally Posted by karl_mh
I had a quick look on Servicebox using your VIN but only seems to show the trailing arms as a whole plus bearings and seals unless i'm missing something, with my Servicebox permissions this is all it seems to give me.
|
I don't know why but newer versions don't show the whole picture. Older 2010,2011 do show, but just like you I don't have it, mine is 2013.
|
|
|
22nd December 2018, 17:51
|
#15
|
L-plater
Join Date: Sep 2018
Posts: 95
|
Quote:
Originally Posted by MartinObviously
No there is no pin, we call the axle tube the axle pin.
It's press fit
I suggest you try some kind of hydraulic puller?
I'm still not sure of the dimensions of the pin/tube though. I don't have a spare axle to measure ![Upset](../images/emoticons/smiley19.gif)
|
I will try to do without hydraulic. My idea is to find the right size bar in combination with good tensile strength and cut the thread and use a nut to extract. Of course, I will need to machine some other parts and use in combination with this. Assuming that extracting force F=200KN you can calculate necessary parameters for this tool at least in theory ![Hmm](../images/emoticons/ermm.gif) .
|
|
|
22nd December 2018, 21:46
|
#16
|
L-plater
Join Date: Sep 2018
Posts: 95
|
|
|
|
23rd December 2018, 22:30
|
#17
|
Established Member
Join Date: Aug 2012
Posts: 2,009
Car(s): Saxò VTS 16v
|
If it is the same type as Ithe one Ive seen some time ago you'll need a welder to use it,as you need to make the outer side of the pin internal diameter smaller so that you can use that to press out the pin,nothing hard,there was a very helpful video on YouTube on how to use the kit but has been taken down for some reason and i haven't found another one since.
Never mind,found it
https://youtu.be/ZWI68p_EwbA
Last edited by VeiRoN; 23rd December 2018 at 22:35.
|
|
|
The Following User Says Thank You to VeiRoN For This Useful Post:
|
|
24th December 2018, 06:33
|
#18
|
L-plater
Join Date: Sep 2018
Posts: 95
|
Excellent video ,and looks relatively easy to do it this way.I was thinking about, is it a good idea to use welding (but not like this) ,but then again I was not so sure if the weld will hold this massive force.I will definitively go in this direction.Thank you very much!
|
|
|
24th December 2018, 09:25
|
#19
|
Established Member
Join Date: Aug 2012
Posts: 2,009
Car(s): Saxò VTS 16v
|
It's not a massive amount,people need to use 20 tons because they do it the wrong way lol.
|
|
|
25th December 2018, 08:32
|
#20
|
L-plater
Join Date: Sep 2018
Posts: 95
|
What is the difference between KS559.06 and KS559.07?Both of them seams to fit on Saxo.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 03:56.
|