VTS/S2 Rallye Gearbox woes
Hi,
Ive just signed up, first post.. so hello, looks like a good place here.! I'm wondering if anyone can help.
I've just swapped the gearbox on my vts from the standard vts one to an s2 rallye one. At the same time fitted a new genuine clutch. I've started the car on axle stands just to check is all ok and this is where the confusion begins...
When I put the gearstick in neutral position and let the clutch out, no wheels spin. Same again if I put the gearstick in the position for 1st gear. When I put the gearstick in the position for 3rd and let the clutch out, the passenger side wheel spins. At no point have I seen the drivers wheel spin.
I got the linkages in height order, if that makes sense, and according to online diagrams that is correct.
I guess my questions are as follows:
Is it possible to remove the linkages, shift the box into neutral by hand and then reconnect them? If so, how do I know I've found neutral by hand?
Could it be a clutch cable adjustment issue (I'm doubting this), how much movement should there be when manually pulling the clutch fork on the gearbox?
Does anyone know where I could've gone wrong on this?
I'm not new to this sort of thing but admittedly I'm not an actual mechanic!
It's a long, boring one this so I appreciate any help you guys can give me!!
Cheers
|