Saxo Engine/Performance If you're interested in tuning Saxo engines, or if you need to know something which is engine related... this is the place for you. |
|
|
19th November 2012, 09:48
|
#101
|
Saxperience Forum Bum
Join Date: Jul 2010
Location: South Wales
Posts: 3,074
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
|
Stop guessing, get on servicebox!
|
|
|
11th December 2012, 14:31
|
#102
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Im going to be ordering my BE hubs which i'll be buying new. I need to know the lenght i need to machine them at 37mm. My old hubs are still on the struts and the car will be getting moved shortly so cant check them.
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
|
|
|
11th January 2013, 07:50
|
#103
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Does anyone know the lenght the BE hubs need to be machined at 37mm OD?
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
|
|
|
11th January 2013, 11:28
|
#104
|
Saxperience Forum Bum
Join Date: Aug 2010
Location: Midlands
Posts: 2,530
Car(s): AX 16v Turbo
|
Quote:
Originally Posted by jsdvtr
Does anyone know the lenght the BE hubs need to be machined at 37mm OD?
|
Same as MA. Just send one with the hubs and machine to same dims.
|
|
|
11th January 2013, 13:33
|
#105
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Quote:
Originally Posted by e8_pqck
Same as MA. Just send one with the hubs and machine to same dims.
|
I will be machining them but dont have any MA hubs spare, i want them done so can get MA ones removed and BE fitted at the same time.
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
|
|
|
11th January 2013, 13:40
|
#106
|
Frequent Poster
Join Date: Jul 2007
Posts: 591
|
Quote:
Originally Posted by jsdvtr
I will be machining them but dont have any MA hubs spare, i want them done so can get MA ones removed and BE fitted at the same time.
|
This is the boat I'm in also, may pay you to get a strut so you can work it out.
|
|
|
12th January 2013, 08:22
|
#107
|
Banned
Join Date: Jul 2009
Posts: 14
Car(s): MK1 Saxo VTS
|
Nice work
|
|
|
26th January 2013, 10:41
|
#108
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Coming to doing my hubs, i was going to machine them too 33mm lenght x 37mm OD as this is the dimensions of the wheel bearing and use a 3mm spacer for the offset.
Or does the hub need to be machined so the back face/flange is flush but there is 2 faces on the back of the hub which are 34mm and 36mm in lenght. Guessing it will be the smaller one in diameter to be machined too but either way its going to be 33-34mm lenght.
If i dont find out this anwser i will just wait until i have my MA hubs off and use old bearing and the MA hub to go off so i get the right offset, etc.
The spacer dimension i will be making them too will be 37.1mm ID x 51mm OD x 3mm Width for anyone whos interested for future reference. This is so it is just in with the inner smaller wheel bearing which is roughly 52mm OD so it doesnt clamp against 2 seperate moving bearings meaning the spacer could get damaged or damage the bearing.
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
Last edited by jsdvtr; 26th January 2013 at 11:16.
|
|
|
6th March 2013, 11:18
|
#109
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Got abit of a problem with my clutch cable not returning back out once clutch pedal is pressed down, i dont know if mayber the cable is getting stuck on the outer sleeve maybe but its all connected up correctly.
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
|
|
|
31st March 2013, 18:18
|
#110
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Anyone tried the spoox BE cables??
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
|
|
|
5th April 2013, 11:57
|
#111
|
Saxperience Forum Bum
Join Date: May 2007
Location: morecambe
Posts: 4,286
Car(s): 2003 vtr/s
|
Has anyone got a part number for the CPS?
Want to make im ordering the correct one.
__________________
Quote:
Originally Posted by unreal106
Nah you want purple yo! makes cars go faster!!!!
|
|
|
|
8th November 2013, 00:54
|
#112
|
Frequent Poster
Join Date: Nov 2010
Location: Worksop
Posts: 571
Car(s): 106 GTI's/Half a turbo project
|
jsd how did u get on with all of this?
|
|
|
20th May 2014, 23:45
|
#114
|
Newbie
Join Date: May 2014
Posts: 1
|
Hi, I was wondering if any one had a part number for the rear engine mount/bearing mount? Been hunting high a low for one. Got one from a 1.6 hdi berlingo coming but if some one has a part number for a new item from pug/citroen even better.
Cheers!
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 18:37.
|