Clutch issue - Page 3 - Saxperience

Jonathancilia · 26th May 2019, 10:47

Yeah thats what i thought. I will get a bolt 7mm with a plain shank then and a nyloc nut Sent from my VFD 510 using Tapatalk

Jonathancilia · 26th May 2019, 20:06

Also the selector shaft seal is not flush with the gearbox. Its recessed inside the hole. I think this is a part of my i have leaks from here Sent from my VFD 510 using Tapatalk

Jonathancilia · 28th May 2019, 13:22

I fitted a 7mm bolt with a plain shank. And fitted a very thin washer about 0.8mm or so. Now there is no in and out play and i used a locknut to tighten everything. All is better now gears are so smooth and precise. No more grinding While i was there i greased up all the linkages and the ball also. Selector shaft seal im not sure how im going to remove it. Its in the hole pretty good. Only way i think i need to screw in 2 screws and lever it Sent from my VFD 510 using Tapatalk

MartinObviously · 28th May 2019, 17:39

Quote:

Originally Posted by Jonathancilia

I fitted a 7mm bolt with a plain shank. And fitted a very thin washer about 0.8mm or so. Now there is no in and out play and i used a locknut to tighten everything. All is better now gears are so smooth and precise. No more grinding While i was there i greased up all the linkages and the ball also. Selector shaft seal im not sure how im going to remove it. Its in the hole pretty good. Only way i think i need to screw in 2 screws and lever it Sent from my VFD 510 using Tapatalk

At least you can get into gear now though!

Jonathancilia · 28th May 2019, 17:58

Yeah thats the main thing haha thanks for the help mate ! Sent from my VFD 510 using Tapatalk

Jonathancilia · 3rd June 2019, 09:53

I swear that this car has sworn in getting on my nerves. Today iwas at a stoplight and the gears became so stiff. I couldnt s3lect first gear, i had to slip the clutch to get going with second gear. Reverse doesnt stop at all when selecting. Grinds like hell. Could this be an issue with the clutch release or something ? Or is this something bad inside the gearbox?. Gears go in fine when car is off Sent from my SM-T560 using Tapatalk

MartinObviously · 4th June 2019, 18:09

Quote:

Originally Posted by Jonathancilia

I swear that this car has sworn in getting on my nerves. Today iwas at a stoplight and the gears became so stiff. I couldnt s3lect first gear, i had to slip the clutch to get going with second gear. Reverse doesnt stop at all when selecting. Grinds like hell. Could this be an issue with the clutch release or something ? Or is this something bad inside the gearbox?. Gears go in fine when car is off Sent from my SM-T560 using Tapatalk

Absolutely no idea man :/ it's weird

Jonathancilia · 4th June 2019, 18:52

Yeah. I booked it to a garage to change the clutch next week. Will see then Sent from my VFD 510 using Tapatalk