| Saxo Problems & Queries If you're having problems with your Saxo and you're after a bit of advice, check this forum out... |
 |
13th August 2017, 20:06
|
#1
|
|
Newbie
Join Date: Aug 2017
Posts: 2
|
saxo 1.1 clutch cable replacement
Evening ,
Just removed snapped cable from my sons 2001 Saxo, plastic attachement had snapped where connected to pedal. I have removed all old cable by disconnecting from gear box, cut threaded end off and pulled cable from inside of car (only this way I could remove old cable). I have spent over 2 hrs trying to feed back through bulk head without success. Looking at the replacement cable the diameter of the plastic clip which attaches to the pedal are of same diameter, but it is impossible to feed through from engine bay. Only solution I can think of is to emry cloth / file the plastic clip to be able to fit through the bulk head. Any informati8n much appreciated.
Paul66
|
|
|
|
13th August 2017, 21:23
|
#2
|
|
Infrequent Poster
Join Date: Sep 2016
Location: lincs
Posts: 104
Car(s): Citroen saxo, fist punto sporting
|
Is it left hand or right hand drive? Right hand drive my vtr I had took 3 guys like 2 hours to do it's a night mare honestly if we had tools would have removed the steering rack from bulk head think that would work not 100% sure though someone back me up?
Sent from my SM-G920F using Tapatalk
|
|
|
|
|
13th August 2017, 22:55
|
#3
|
|
Saxperience Forum Bum
Join Date: Jul 2010
Location: South Wales
Posts: 3,074
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
|
sounds like there may be a part of the old cable still in the way, or its the wrong type.
|
|
|
|
|
15th August 2017, 19:54
|
#4
|
|
Newbie
Join Date: Aug 2017
Posts: 2
|
Thanks for reply, car is RHD and there are no old parts left after removal of old cable. The plastic end that locates over the pedal will not fit through the bulk head. Can someone confirm if there are different sizes to these? I'm going to sand down the diameter tomorrow to make fit. I will also check with dealer if sizes differ from each year.
|
|
|
|
|
15th August 2017, 20:43
|
#5
|
|
Saxperience Hardcore!
Join Date: Dec 2007
Location: smurfland.
Posts: 17,346
Car(s): Ex saxo owner.
|
I'm sure I read on here albit yonks ago that there are different types/sizes etc.
|
|
|
|
|
16th August 2017, 10:17
|
#6
|
|
Saxperience Forum Bum
Join Date: Jul 2010
Location: South Wales
Posts: 3,074
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
|
i've had a look on servicebox and there's only one cable listed for a 1.1, 2150R0.
so you either have the wrong cable or there's something left in the hole.
|
|
|
|
|
18th April 2019, 12:09
|
#7
|
|
L-plater
Join Date: Sep 2018
Posts: 95
|
HI
I need to replace the cable also but I'm not sure what aftermarket parts fits orginal
2150 Q3
I found this on ebay it should be genuine
https://www.ebay.co.uk/itm/Genuine-F...wlhpZgEA3#rwid
But it's 2150R0.
|
|
|
|
|
18th April 2019, 22:17
|
#8
|
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by Alexa
|
1045mm is the correct length
2150 r0 is the only part number listed for RHD 1.1 models.
I think confusion has come about because the cable end is really hard to push through the bulkhead/pedal box
__________________
The rain kept a trollin'
|
|
|
|
|
22nd April 2019, 23:06
|
#10
|
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Sorry Right hand drive is 1045mm!
__________________
The rain kept a trollin'
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 18:49.
|
