Internal Wiring problem

[Duckett25]

Hi guys,

I was having trouble with the radio a while back and while messing about with it it seems I have somehow disconnected this bit, now I cannot remember where it came from but it is attached the the back of the internal fuse box so it must be fairly local to there, but I cannot see anything that it is supposed to attach to. Any ideas where it is supposed to go as I currently have no radio, or interior lights.

Everything seems to be plugged in behind radio and fuse box so I am stumped any help much appreciated!!!








image hosting over 5mb

[Bedford126]

It's not suppose to be plugged into anything it's got it's own little metal bracket. It's the OBD port.

[Duckett25]

I see, so if the fuse seems to be ok, any ideas why I wouldn't have radio or interior lights?

Thanks

[Bedford126]

Originally Posted by Duckett25

I see, so if the fuse seems to be ok, any ideas why I wouldn't have radio or interior lights?

Thanks

Could be a few different things have you tested 12v feed to interior light and radio both have a 12v?

[axsaxoman]

Originally Posted by Bedford126

Could be a few different things have you tested 12v feed to interior light and radio both have a 12v?

as bedford says --but start by testing if there is 12v at fuse both sides--then you just have to trace wiriing and all connectors to see where stops
no magic cure for wiring problems .
so you need a wiring diagram to follow the path of the feeds from fuse + what connectors it goes through on its way to the units it powers