sub amp box and wireing packages? - Page 6 - Saxperience

haz_pro · 14th July 2008, 09:23

yeah it does on the outside, how ever on the inside it has like a nut holding down a flat piece or metal which bents down slightly, and it has a hole in near the bottom? i wud take a pick but the whoel sub is together and putting it together without a drill took so long hah.

hopefully someone knows what i mean?

Coonper · 14th July 2008, 09:25

Quote:

Originally Posted by haz_pro

yeah it does on the outside, how ever on the inside it has like a nut holding down a flat piece or metal which bents down slightly, and it has a hole in near the bottom? i wud take a pick but the whoel sub is together and putting it together without a drill took so long hah.

hopefully someone knows what i mean?

I know what you mean mate!

You have 2 options...

1) Solder the cable to the little rectangular tab

2) Use a spade crimp connector and just slide it on.

Personally i would solder it though!

Please dont push the cable through the whole and twist it round a bit!

haz_pro · 14th July 2008, 09:28

i think i was meant to solder it, i will leave it as is for now and see how it works!

haz_pro · 14th July 2008, 09:29

no i didnt push it through the hole, maybe what i done is worse though haha, i used the nut holding the metal thing down, wrapped the wire round it and tightenned the nut down.

I tryed using a spade connected but it wasnt holding on ver well and the wire wasnt ac tually touching the connector, i feel like a right twat.

Coonper · 14th July 2008, 09:43

Quote:

Originally Posted by haz_pro

no i didnt push it through the hole, maybe what i done is worse though haha, i used the nut holding the metal thing down, wrapped the wire round it and tightenned the nut down.

I tryed using a spade connected but it wasnt holding on ver well and the wire wasnt ac tually touching the connector, i feel like a right twat.

So you have clamped the cable under the nut? Mmm..

It will hold it, but im not sure how good a contact it will make.

Best solder it mate!

Or buy some correctly fitting spades.

haz_pro · 14th July 2008, 09:47

yeah il have to find my old solder and solder it.

thanks for all the help.

4shworth · 14th July 2008, 09:47

I got the package...

Fusion one from Halfords for £100.

To be fair it does the job and is pretty good.

Easy to fit/wire in. Only took me just over an hour on Saturday.