David's 1992 Peugeot 106 XSI 16v project!

[DavidsVTR]

Update:

Got the 3" pugsport fitted!
Looks ace, although can hardly see it in the pitch black
Also, I fired the baby up today, the exhaust system sounds awesome! I'm so impressed! Really want to get it on the road now..

Got a really bad pic of the exhaust since it was pitch black outside... Edited the photo to make it lighter

I have also mounted the slimline fan
I've decided I'm going to wire the fan to be controlled via a relay and on/ off switch next to the steering wheel. so I can manually flick the fan on when stationary in traffic

Looked into wiring it up to the existing loom, but it doesn't seem to have a thermostat so I'll be easier to wire new

Started wiring the fan, got the main leg into the cabin area

Pics....
(Excuse the air filter was a temporary to get the engine running )

Only pic I got ATM of exhaust will get better pics in the light



Fan mounted



Over the next few days I'm going to finish wiring the fan, then hopefully my induction kit will have turned up, so I can fabricate a hose for it and sort out a catch tank
Might end up relocating the battery so there's more room in the bay ....

[Philwhite95]

looking good mate i want a s1 xsi or rallye project soo bad

[DavidsVTR]

Originally Posted by Philwhite95

looking good mate i want a s1 xsi or rallye project soo bad

Do it! I love s1 106's. Getting rarer now too

[willsy]

Originally Posted by Philwhite95

looking good mate i want a s1 xsi or rallye project soo bad

Buy mine Phil :-)

[Jizanthapus]

The pugsport looks awesome!

[DavidsVTR]

Originally Posted by Muel

The pugsport looks awesome!

Thanks I love it

I'll try get a better photo.



Purchase update:

Got this today... Enclosed induction kit & green cotton filter
Was in two minds about it tbh....

It'll need abit of 'modifiying' to fit into the smaller s1 bay, but since I've got it, I might aswell fit it!

If I don't like it then I'll just fit a standard airbox

The original pipe work that came with it was too long and I didn't want the oil breather hole in the side (I'll be fitting a catch tank), so I've ordered a new hose to fit

Pic!



No other updates on this really
Need to pull my finger out and get he fan wired in, then I'll put bumper back on... Fit foglights and replace headlights
Going to get some Osram nightbreaker bulbs for it aswell!

Opinions???

[DavidsVTR]

Small update

Just a reminder for you all to keep them air filters clean and oiled

The one I bought didn't look too bad really, but gave it a quick clean as I had the cleaning stuff, and look at all the dirt!!

Now I have a cleaned and re-oiled air filter



Also wired the fan today! Tested it too to make sure it's rotating correctly.
Just need a switch ...

That's all for now dudes!

[watson123]

Originally Posted by DavidsVTR

Small update

Just a reminder for you all to keep them air filters clean and oiled

The one I bought didn't look too bad really, but gave it a quick clean as I had the cleaning stuff, and look at all the dirt!!

Now I have a cleaned and re-oiled air filter



Also wired the fan today! Tested it too to make sure it's rotating correctly.
Just need a switch ...

That's all for now dudes!

WOW! Just bought a K&N off ebay that looked dirty so if yours looked ok and came out like that mine will be terrible cheers for the reminder!

[DavidsVTR]

Originally Posted by watson123

WOW! Just bought a K&N off ebay that looked dirty so if yours looked ok and came out like that mine will be terrible cheers for the reminder!

Yeah defo worth a clean

The green filter hardly looked dirty when I bought it, but I cleaned it anyway since I had the cleaning stuff... And I was shocked actually how dirty it was!!

I used the k&n recharger kit... Highly recommended

[watson123]

Originally Posted by DavidsVTR

Yeah defo worth a clean

The green filter hardly looked dirty when I bought it, but I cleaned it anyway since I had the cleaning stuff... And I was shocked actually how dirty it was!!

I used the k&n recharger kit... Highly recommended

Yh i was debating ordering some when i won the auction but didnt so will pick some up from halfords i saw some in there the other day.

[DavidsVTR]

not really an update but... Recieved the following parts today

- red 90 degree ash hose for induction kit
- red silicone pipe for oil catch tank/ return
- black engine dress kit to today up some of the existing wiring

[DavidsVTR]

Update:

Induction kit fitted!

Had to modify it a little to fit. It Takes up quite abit of room though, struggling to fit battery back into the bay. Looks like I may have to relocate it to the boot area.
I also need to sort out an oil catch tank

Thoughts?

[alexgtifleming]

GREAT work. id love a s1 <3

[DavidsVTR]

Originally Posted by alexgtifleming

GREAT work. id love a s1 <3

Get one then?!

[willsy]

Originally Posted by DavidsVTR

Get one then?!

Had virtually no interest in mine :-(

Projects coming along really well mate. I really will get to go through all my spares soon honest

[DavidsVTR]

Originally Posted by willsy

Had virtually no interest in mine :-(

Projects coming along really well mate. I really will get to go through all my spares soon honest

I can't believe it tbh! Such a nice and well looked after car. There's probably not another one around like it in such good condition ... And has not 16v'd haha!
I've noticed you gave put an MOT on it too should attract more buyers now hopefully!

Thanks matey! haha, no worries! I'm in no rush which reminds me ... I still need to create a proper list of parts I need!

[Philwhite95]

looks smart mate.

id love to buy yours willsy but im low on funds and my mum wont let me get another car untill iv shifted the mango furio im breaking at the moe! apperently having 3 cars on the 4 car drive way is to much :/ haha. then will maybe look into s1 106 or 205 gti project

[ky92]

very nice s1 you have there! keep up the good work

[DavidsVTR]

Originally Posted by Philwhite95

looks smart mate.

id love to buy yours willsy but im low on funds and my mum wont let me get another car untill iv shifted the mango furio im breaking at the moe! apperently having 3 cars on the 4 car drive way is to much :/ haha. then will maybe look into s1 106 or 205 gti project

3 cars on a 4 car drive.... There's room for another?! haha
Get a move on then, get one shifted then you might be able to buy Wilsy's!

Originally Posted by ky92

very nice s1 you have there! keep up the good work

Thanks dude!

[DavidsVTR]

Purchase update... No progress though!

Recieved my Carbon battery box and relocation cables!
Just awaiting a battery isolator and 'joint box' I have ordered to complete the relocation

Need to pull my finger out and get the rear stripped out.

Progress will be slow though as the daily saxo has MOT coming up

Pic of battery box



Still looking for afew parts...

- 1ltr Mocal oil catch tank
- sunroof tilt and slide unit
- upper strut brace
- lower strut brace (maybe)

Enjoy