Indicators intimitant??? - Saxperience

Col3y · 26th January 2012, 23:17

Please help!!! i have a 106 and my hazard lights work everytime, ive replaced the indicator stalk, ive unplugged the relay and changed the bulbs. but when i try indicate using the stalk it doesnt always work?

Anyone know what to try next before auto-elecy is called

Cheers

tingaling · 26th January 2012, 23:40

Have you tried the relay?

Col3y · 27th January 2012, 20:47

Phoned a really helpful auto elecy today and he said convinced its the stalk as it was second hand.. so hopefuly will have problem sorted tomorrow

tingaling · 28th January 2012, 09:34

Could be then if you put a second hand one on, they're a really common fault

Col3y · 28th January 2012, 13:24

Just tried a new stalk and still isnt working

grrr!! going to give up and go to a auto - elecy

mcjacko1987 · 28th January 2012, 13:29

i mite be way off the picture here as its just a random guess. but how about the clock spring whatever its called bit?http://i291.photobucket.com/albums/l...o/CIMG2433.jpg
maybe thats sticking at times. try replace that???

Col3y · 28th January 2012, 15:24

Ive taken the stalk out of its position and tried the stalk and still no luck, ive replaced the stalk with a new one, iv replaced the relay, and taken out the hazard switch, everything works when i press the hazards, but as soon as i indicate with the stalk, no relay clicks, no dashboard lights, or bulbs flash.. so its something connected to the stalk and stuff

tingaling · 28th January 2012, 15:45

Sounds like wiring fault then, have you checked all fuses?

Col3y · 28th January 2012, 16:21

not yet mate, im going to check wires leading into stalk which comes from my toad alarm. but if not only other options is take bulbs out and clean them, and also check fuses and then i give up