Important! : URGANT thermostat houses needed

[Tiffany2110]

Hello all i desperatly need help or im going to have to scrap my beautiful 2000 blue 1.0 saxo my rad has a hole and my thermostat housing has cracked leaking everywhere. My mechnic and i have searched the entire internet and called every garage and nowhere can source me a thermo housing please if anyone knows how i can get one its urgant its plastic btw thank you

[aldred309uk]

Where roughly do you live? It will help with recommendations. I'm unsure exactly as to what bit you mean. I just replaced the radiator on my 52 plate 1.1 desire for £35 of that's of any use to you? I don't know the difference in layout between the 1.0 and the 1.1 but I think the thermostat housing on the 1.1 is metal.

[Tiffany2110]

Originally Posted by aldred309uk

Where roughly do you live? It will help with recommendations. I'm unsure exactly as to what bit you mean. I just replaced the radiator on my 52 plate 1.1 desire for £35 of that's of any use to you? I don't know the difference in layout between the 1.0 and the 1.1 but I think the thermostat housing on the 1.1 is metal.

Hi i dont know if this is how to reply but i live in berkshire and the name of the park is thermostat housing its the plastic that surrounds the thermostat i dont know how else to say. Its to the right of the rocker cover

[Tiffany2110]

The one in the 1.0 is plastic and none of the other cars onea fit thats the issue im having nowhere has my part

[VeiRoN]

I don't see why you would scrap it,anyhow Eurocarparts or ebay got to have what you need.

[Tiffany2110]

Originally Posted by VeiRoN

I don't see why you would scrap it,anyhow Eurocarparts or ebay got to have what you need.

No no shop in the entire uk has it check for yourself if you dont believe me iv tried euro iv tried citroen and iv tried gsf how am i suposed to drive a car that has no coolant of course ill have to scrap it if i cant get the part

[aldred309uk]

Originally Posted by Tiffany2110

No no shop in the entire uk has it check for yourself if you dont believe me iv tried euro iv tried citroen and iv tried gsf how am i suposed to drive a car that has no coolant of course ill have to scrap it if i cant get the part

https://www.bbcsuperfactors.co.uk/

They're my local parts supplier, they haven't failed me yet with parts, may be worth giving them a call? Have you also tried citroen or Peugeot?

[Tiffany2110]

Originally Posted by aldred309uk

https://www.bbcsuperfactors.co.uk/

They're my local parts supplier, they haven't failed me yet with parts, may be worth giving them a call? Have you also tried citroen or Peugeot?

Thank you ill get my guy to call. Yes as explained above citroen claim they dont stock this part as its 18 years old or at least my local dealer doenst

[Tiffany2110]

Still no part avalible throughtout any company on the uk. Looks like we are gunna have to glue it together and when it wont hold thats the end

[mtee]

Is it this part? According to the vehicle list (Fahrzeugliste) it should fit Saxo 1.0.
https://www.ebay.de/itm/Thermostatge...0/153215455275

[MartinObviously]

If it's the block that bolts onto the cylinder head that holds the Thermostat

This part is still available from Citroen, it's an EARLY type housing.



This is the same part for ALL Aluminium blocks for Series 1 Peugeot 106. This is why your dealer is struggling to find the parts for your 1.0

As all 1.1 and 1.4 alloy block saxos have the "later" type housing.

if it's part "1" then it's £183 from the dealer including the VAT. you'll probably get an equivalent online for much less.

The other part I think was less than a tenner when I looked part "10" that holds the thermostat in place.

It's still readily available from the dealer, the parts can still be produced as they are not "NFP".

[Tiffany2110]

Originally Posted by mtee

Is it this part? According to the vehicle list (Fahrzeugliste) it should fit Saxo 1.0.
https://www.ebay.de/itm/Thermostatge...0/153215455275

Unfortunatly its not it claims it fits my car but my mechnic saids its not but thank you

[Tiffany2110]

Originally Posted by MartinObviously

If it's the block that bolts onto the cylinder head that holds the Thermostat

This part is still available from Citroen, it's an EARLY type housing.



This is the same part for ALL Aluminium blocks for Series 1 Peugeot 106. This is why your dealer is struggling to find the parts for your 1.0

As all 1.1 and 1.4 alloy block saxos have the "later" type housing.

if it's part "1" then it's £183 from the dealer including the VAT. you'll probably get an equivalent online for much less.

The other part I think was less than a tenner when I looked part "10" that holds the thermostat in place.

It's still readily available from the dealer, the parts can still be produced as they are not "NFP".

Ill try take a photo of it tmrow

[Tiffany2110]

Originally Posted by MartinObviously

If it's the block that bolts onto the cylinder head that holds the Thermostat

This part is still available from Citroen, it's an EARLY type housing.



This is the same part for ALL Aluminium blocks for Series 1 Peugeot 106. This is why your dealer is struggling to find the parts for your 1.0

As all 1.1 and 1.4 alloy block saxos have the "later" type housing.

if it's part "1" then it's £183 from the dealer including the VAT. you'll probably get an equivalent online for much less.

The other part I think was less than a tenner when I looked part "10" that holds the thermostat in place.

It's still readily available from the dealer, the parts can still be produced as they are not "NFP".

1 looks exactly like the piece tho in plastic

[MartinObviously]

Originally Posted by Tiffany2110

1 looks exactly like the piece tho in plastic

Yes that's correct, it is plastic. Well you can get them in cast aluminium as well but they both fit the same.

Part number is 1336 81. it's really expensive at the dealer - but they can get it and it is readily available.

could try looking online with that part number?

[Tiffany2110]

Originally Posted by MartinObviously

Yes that's correct, it is plastic. Well you can get them in cast aluminium as well but they both fit the same.

Part number is 1336 81. it's really expensive at the dealer - but they can get it and it is readily available.

could try looking online with that part number?

Thank you so much ill look