Vtr crank timing pulley - Saxperience

Glennmc · 27th May 2018, 18:45

Just joined here for the first time, although you guys have helped me out soo mich through others past experiences and threads! Thank you!

I have been looking and calling for a crank timing pulley and can not get one anywhere, nor can i find a part number.

Engine is making a knocking sound from the crank pulley. I have seen the pulleys start to wear between the woodruff key that hold the pulley in place on the crankshaft And the crank pulley itself (timing belt pulley)
So im taking a guess this is my noise haha.
All i can find is the fan belt pulley that bolts onto the crank pulley that i need.

Any help is greatly appreciated.

Slevan_7 · 27th May 2018, 19:08

If you go on ebay and type in saxo vts, click car parts then change to ending first, and used only there's a billion engine components most from Germany. If you can't find what you want just message some say who had camshaft pulleys or a sump for sale.

I've had to do that before with a mk1 flywheel sensor bracket.

Sent from my F8331 using Tapatalk

Glennmc · 27th May 2018, 19:24

Thanks sleven7, ill try that now!

Glennmc · 27th May 2018, 22:52

Any information on part number, or if the 1.1 - 1.6 8v and 16v pugeot, saxo are the same pulleys?

Slevan_7 · 30th May 2018, 21:21

I would of thought the bottom end was the same but don't hold me to that, my experience working for a car company and breaking car's on the side to pay for my projects tell me different, I'll have a look in manual I have when I'm back in work but it's probably best to call citroen or count the teeth on yours and measure the depth and diameter just pass that on to someone who is breaking a engine.

Sent from my F8331 using Tapatalk

welshpug · 31st May 2018, 21:35

16v has a wider belt iirc.