Vts - Saxperience

Naytjames18 · 29th July 2019, 15:11

Hi guys, new to the saxo scene just got myself a 2001 vts needing quite abit of work mainly rust issues in the common places, under the ecu, under the battery, cills and boot
I have seen that you can buy new cills but can anyone point me in the right direction of getting hold of a new boot floor and also the two inner front arches

Thanks

Furioman · 29th July 2019, 17:31

Inner wings and boot floor and unobtainable your going to have to fabricate something welcome to the forum

dturbo · 29th July 2019, 22:33

Welcome! sounds like you have a bit of work to do. Can't need a full boot floor surely, get some pics up of the trouble areas and folks can advise. My arches were rotted out and no longer attached to the boot floor, but managed to repair them. As above, probably need to get familiar with making repair sections. It's not too hard unless a complex shape, but its mostly just flat metal sections or a bit of bending. There are bits of U and box section available if required for some of the reinforcing / chassis leg type parts.

Pics would be best for the best advice.

emmasanchez3 · 2nd August 2019, 04:57

hello guys, any tip for a newbie ???

Manu · 7th August 2019, 11:20

Quote:

Originally Posted by emmasanchez3

hello guys, any tip for a newbie ???

You'll get answers if you post a question in the relevant area.