Streamline Carbon Fibre Product List - Page 14 - Saxperience

Bicston · 10th July 2008, 00:51

frankie - Yes our roof panels have the 2x2 twill weave on show.

Saturn Saxo - Keep an eye on our website, gallery section being updated this week, a few pics of saxo parts in the online shop section so far.

thanks

Bic

Jaytee · 10th July 2008, 01:17

Defo gonna have a look at the stuff you have got mate, love your 106 btw lol.

tobomoto · 10th July 2008, 11:22

call me a bit stupid but how does everything fit on? do you just use tiger seal or somthing (door handels ect)? interested in a few bits but i dont want them falling off after 10 mins!

FinchysSaxo · 10th July 2008, 13:35

Very interested in the centre console in dash for a saxo, and the Glove Box cover. When will you have pics of these up? Iv got a Flocked dash so think they would go well with it, plus the glovebox door was Flocked badly so looks a bit wank atm so would be good to tidy it up.

Thanks

Finch

tobomoto · 11th July 2008, 10:29

just a couple of quick questions; would you be able to cut a hole for a sunroof in a carbon roof? (im guessing not- strenght issues) and would you be able to cut some holes in the doorcards for tweeters and possibly put some slots where the speaker goes? cheers mate.

Bicston · 20th July 2008, 17:21

The carbon roof is designed for not using a sunroof as the brackets would need to be moulded to use with the new composite panel. Strength isnt the issue, manufacture of the sundry parts to house the glass and mechanism would be, coslty etc and rare sales i am sure.

Yes we can trim all of our parts to bespoke requirements, which door cards ? the 3 peice I presume ?
thanks

Bic

tobomoto · 20th July 2008, 17:37

yeah the 3 piece ones. i wanted to have a hole for tweeters but i didnt want to cut it wrong and mess them up! ive just been looking at your website- so tempted with a lot of stuff. just wondered if you will be selling everything at trax?
just wondered if things would work with each other i.e would a mk2 carbon grille fit in a mk2 carbon bonnet, and would the door cards fit on the carbon doors? sorry for sounding like a div!

Bicston · 24th July 2008, 00:01

Yes we can trim to your requirements no problem. We may have some products for sale at trax, but intend to display more than sell tbh, orders can be taken and we will have facility for chip & pin

Yes products work with others from the range no problem.

Our new seat

Start from £599 each, and a discount if you buy 2

cheers

Bic

pjm300 · 24th July 2008, 09:00

will you be making rubber surrounds for the harness slots bic, and will they be trimmed in any way?

Bicston · 24th July 2008, 13:14

yes this is an unfinished seat, finishing trim detail etc not complete. Will use Raychem heatshrink

Bicston · 10th August 2008, 17:53

Now finished for first customer, going in a 205 in time attack next year

the seat weighed in a little heavier than we hoped at 3.9kg with side mounts bolted on, but this is a carbon/e glass mix so not 100% carbon so lighter ones to come

£599.99 each with side mounts of buy 2 and get them for £1099.99.

thanks

Bic

smiith · 10th August 2008, 17:58

looks ace that dude, and so light!!!

you wouldnt be planning on making a 106 center console aswell as a saxo would you?

Bicston · 10th August 2008, 20:22

we have done the moulds just not done first parts yet, £199.99 each including a gearstick gaitor with them

adamhighfield · 11th August 2008, 14:36

bic - how much is a fibreglass roof panel? I have a rollcage already dont worry. Also can you sell me the bits and bobs to fit it so i can do it myself?

Bicston · 11th August 2008, 18:49

Adam - We have decided not to go down the route of fibreglass roof panels, we are not convinced of their strength and it is not something we wish to risk. Pre preg carbon fibre only I am afraid.

thanks

Bic

Alex_3589 · 11th August 2008, 19:28

Bic,
is it possible to buy just the two front door cards for a saxo?
also how do the door handles attach to the door cards?
Finally, do you do the carbon fibre dial surrounds that sam cooke has in his vts?
thanks.

adamhighfield · 11th August 2008, 20:12

ok bic, well how much for 1 then and would you sell me the relevant sealants etc to fit it myself?

Also the stack dash surround you do could you do 1 with a cutout for my etb digidash? Or 1 without a cutout so i can cut it out myself? how much?

Bicston · 13th August 2008, 00:29

alex - Yes a front pair of cards (with either 106 or Saxo handle cutouts) are £99.99including delivery to club members. Whcih handles do you mean, I don't quite follow. We do not do the dash surrounds in carbon no, only mounting peices for aftermarket dash displays.

Adam - At present we wish to fit all the replacement roof panels we produce and supply, so at present supplying you with materials etc is not an option i am afraid.

Replacement Roof panel for Saxo - Pricing

Main panel - £600
2 x inner cross bars -£150
Lacquering of main panel - £150
Removal of OE panel and fitment of Carbon panel (subject to vehicle state
ie. full interior or stripped etc) - £200
Windscreen removal & refitment - £70.00 (plus new seal if OE cannot be reused)

We cna provide you with a dash display piece to suit your display, you will need to supply us with a template and dimensions or the dash itself would be even better to ensure 100% fit, price £25.00 delivered.

thanks

Bic

adamhighfield · 13th August 2008, 16:26

i have a template bic that you can print out and it prints at the actual size, i can email you that, what address shall i email it to? and when do you want the £25?

Thanks, ad

adamhighfield · 13th August 2008, 16:28

I also want a pair of replacement mirror base plates at the same time please matey, how much for both?