Fork bearing below fork arm clutch

[TheRod]

Hi the upper bearing just below the clutch fork, this is part number 2175 12. And called fork bearing clutch.. Is it possible to 1. Take off the fork lever after disconnecting the cable. 2. Remove the pin securing the fork arm and remove the bearing which looks like a plastic type Bush without removing the gearbox and clutch assembly.? I know its work cos there is play when you rock the shaft.

[dturbo]

Not sure if you can knock the pin out to remove the lever from the shaft (don't think so though) but you definitely can't just remove it with the cable off, there are 'fingers' on the inside the push the release bearing forward (the release bearing is clipped to them too). So I think it will be a box off job.

[welshpug]

there's a bearing at the bottom end of the shaft that will also be worn out if the upper is worn.