slacken off cable adjuster ,to start with --lever h/brake cable lever on caliper forward +slip out cable nipple
wiggle outer cable till it comes out of caliper .
do not punch with drift you will just make the end bigger and it won,t come out then
unbolt caliper from hub --don,t try to split caliper --the 5 sided hex fixings are meant to give you that clue --as thats a very special type
on rebuild h/brake lever MUST always be back against its stop when cable is adjusted --do not over adjust cable as it will stop auto adjusted inside caliper from working
min h/brake notchs is 5 to fully locked --any less and you stand a chance of cable pulling brake on when car is loaded or self adjuster not working
citroen manual says 7 notchs --thats too much
__________________
when the flag drops the bulshit stops.
owner of GMC motorsport 01671404030/01671403699
|