Will these fit - Saxperience

Zzzzz_zz · 27th December 2022, 08:38

"Ford fitment 14" alloy wheels, pcd 108, 6jx14, et25. Removed from Sylva Striker"

Sent from my SM-G990B using Tapatalk

AdamB2904 · 27th December 2022, 09:51

Same bolt pattern so will bolt on fine. You will need a spigot ring as the centre bore will be a touch too big Can use this website to check fitment https://www.willtheyfit.com/ Sent from my SM-G986B using Tapatalk

Zzzzz_zz · 27th December 2022, 19:33

Quote:

Originally Posted by AdamB2904

Same bolt pattern so will bolt on fine. You will need a spigot ring as the centre bore will be a touch too big Can use this website to check fitment https://www.willtheyfit.com/ Sent from my SM-G986B using Tapatalk

Thanks, unfortunately they were sold already. Sent from my SM-G990B using Tapatalk

MartinObviously · 27th December 2022, 20:29

Quote:

Originally Posted by Zzzzz_zz

Thanks, unfortunately they were sold already. Sent from my SM-G990B using Tapatalk

Always the way

In future, generally Ford fitment wheels won't fit, because of the offset. The wheels often hit the brake caliper or touch the struts. In the rear they rub the axle.

mentioned already you would probably need some spigot rings to centre the wheel, theres places on Ebay etc that print the sizes you need they cost peanuts.

You need an ET of about 15-20 for 106/AX/Saxo. Wouldn't fit rims wider than 6J either.

I run C5 "Alloys" and even they're bloody close at the rear. The sidewalls have rubbed the ARM end plate a few times on track.