Race dash (multifunction) - Saxperience

wolf_gsxr · 2nd December 2011, 00:37

Has anybody any experience in how the speed sensors work on these things? All the ones I find are the magnetic type like a pedal bike. I think that's abit of a crude way of doing things. The dash I was looking at was a Koso db02r. Thought I'd post it here as it's for my track car and nobody seems to be able to give a proper answer to my questions everywhere else. Cheers.

Tom5190 · 2nd December 2011, 01:48

Quote:

Originally Posted by wolf_gsxr

Has anybody any experience in how the speed sensors work on these things? All the ones I find are the magnetic type like a pedal bike. I think that's abit of a crude way of doing things. The dash I was looking at was a Koso db02r. Thought I'd post it here as it's for my track car and nobody seems to be able to give a proper answer to my questions everywhere else. Cheers.

I fitted a stack, what speed sensor type does the koso come with?

Ross^p · 2nd December 2011, 02:00

You mean like slammed106 has done?

I use a dash2 with dl2 datalogger - the dl1 has onboard gps which feeds the dash for speed amongst other things. Best and most accurate solution, but if you can't do that, the only real way is with a hall sensor, as above.

wolf_gsxr · 2nd December 2011, 09:25

http://www.digital-speedos.co.uk/new...-kit-120-p.asp
That's the dash and there's a choice of sensors at the bottom and on the accessories page.

wolf_gsxr · 2nd December 2011, 10:24

It does look abit like that but his looks more fancy. I was told the kit came with a magnet and a sensor. Just seems like it would be very inaccurate with all the driveshaft movement.

adamskiTNR · 2nd December 2011, 17:26

i am running the magnetic based speed sensor. running it at the hub with an ally bracket for the sensor. had no problems or spikes etc.

wolf_gsxr · 2nd December 2011, 20:12

That's made me feel abit better. You got any pics of the setup? Brackets ect? What dash are you using mate?

adamskiTNR · 2nd December 2011, 20:22

i can get some tommorrow. i'm running a etb digitash 2 pro+

slammed106 · 11th December 2011, 17:28

as posted above,

im using a racetech dash2 and after a chat with the company doing my loom i was advised to use a hall effect sensor from these guys:

http://www.kasensors.co.uk/KA-SP-wheel-speed-sensor.pdf

i think it was about £50 from memory then fabricated my own trigger wheel + housing that fits onto the intermediate shaft and a ally bracket the mount the sensor...

Matt@ TDF has fitted these dash displays to quite a few track cars now and its a proven reliable method to get an accurate signal for wheel speed..