Grommet for Power Cable Picture

[Jamb0]

[chrissyg09]

where does the power cable come through after putting it through the grommet. cant seem to see it on the other side.

[Jamb0]

just under the brake servo mate as shown in the picture. my wire was thick enough to push through on its own!

[gazpyb]

thats what the last picture is there mate

[olav]

Question: I have the steeringwheel on the left, is this grommet on the same side as in "uk" cars?

[Predator_R32p]

i imagine it will be olav

[olav]

Thanks, no wonder I haven't found it in my search on the passengerside lol

[saxtreme]

i did it differnet but similar i used left over speaker wire from the wire that goes from amp to sub tied to red cable then pushed the smaller cable through fine then pulled it on through and the not made the hole bigger to get thickedr red cable through =] =]

[rumble291]

Cordless driver/screwdriver, Drill bit slightly bigger than the cable. make sure drill straight away from the othercables and hey presto just push the cable through nice and simple .

[Jamescl1992]

Whats the best way to run the cable to the boot?
Take the carpet up and run it under it?
How easy isit to get the carpet up?

[JoshsSaxo]

yeah tom if you could show me some pics of how you got the power cable through that would help me because i can see the blank holeless gromet underneath where all those wires are going through, but how do i get the power cable through that?

[danny-vts]

Originally Posted by JoshsSaxo

yeah tom if you could show me some pics of how you got the power cable through that would help me because i can see the blank holeless gromet underneath where all those wires are going through, but how do i get the power cable through that?

make another hole in the grommet next to the wires then you should get the cable through

[kae]

Originally Posted by Jamb0

When I did mine I couldnt see it like that in the engine bay, it seemed to go through the grommet and hit something, had to send it right and around the obstacle (right as if im sat in the passenger seat). I have to attach it to a coast hanger wire and mess about with it until it was visable. Pretty dodgy really i cant see what its touching or anything but works fine :}

Also attached it to fuse box, works a treat.

[Matty1400]

Top thread, haven't has the saxo long and have spent the last 3 months with my sub in the boot not wired in, cause I had no idea how to get the power cable through the firewall!

Only have one problem, my power cable has already got an inline fuse in it (cause it came outta my old car) and that obviously wont go throught the grommit, any ideas?

[Rudpud]

Originally Posted by Matty1400

Top thread, haven't has the saxo long and have spent the last 3 months with my sub in the boot not wired in, cause I had no idea how to get the power cable through the firewall!

Only have one problem, my power cable has already got an inline fuse in it (cause it came outta my old car) and that obviously wont go throught the grommit, any ideas?

run the other end through?

[Xandhurst]

Quick question here, did you have to make a hole in the grommet to feed the red cable through or was there already one there. Mine is just like yours, just without the red cable running through, and no hole. My red cable has a fuse box attached to it, and I dont see that fitting through the hole somehow and Im quite sure the cable is not long enough to have the box IN the car instead of the engine bay...

[Xandhurst]

Ok sorry, just noticed the post before hand..
='p

[Xandhurst]

Originally Posted by Xandhurst

Ok sorry, just noticed the post before hand..
='p

Should have an edit feature, still need to ask if you made the hole (:

[mi_ruina]

Just a quick tip in case anyone's interested...if you don't have wire coat hangers etc, after i de-pinned my locks, i kept them as a just in case and they proved VERY handy for pushing the power cable through the grommet. Simple as taping the wire to the end and pushing through. Hope that helps

[Coops200691]

Use plenty of lube