Headunit losing memory - Saxperience

Mieran · 15th September 2009, 16:02

Had a quick search and everyone says to swap the red and yellow wires.

But my headunit plugs straight into the original wires and there is no in between loom. Then I found this guide:

http://www.saxperience.com/faq/show-....php?artid=107

It says get a "Vauxhall ISO loom". Will one of these do the job?

http://cgi.ebay.co.uk/PC2-36-4-Vauxh...d=p3286.c0.m14

reevesy_vtr · 15th September 2009, 16:38

yes mate or you can just swap the wires in the iso plug.

Mieran · 15th September 2009, 16:40

cheers

kendrick · 18th September 2009, 00:21

Dont buy that off ebay as it doesnt work, i found out the hardway, buy it somewhere you can return it

Mieran · 18th September 2009, 12:28

its on the car now and it works

kendrick · 19th September 2009, 09:02

Quote:

Originally Posted by Mieran

its on the car now and it works

No Way :'( Mine didnt, i dont know if ive done something wrong. What head unit are you using?

dimitri · 21st September 2009, 01:35

you dont need to buy anything just swap the wires! One delivers a constant current from the battery and the other only has a current when the ignition is switched on to stop it being left on and draining your batt

kendrick · 21st September 2009, 07:59

Quote:

Originally Posted by dimitri

you dont need to buy anything just swap the wires! One delivers a constant current from the battery and the other only has a current when the ignition is switched on to stop it being left on and draining your batt

Without a load of hassle, you cant with the standard loom