Mobile Devices: Lite Theme CitroŽn: CitroŽn Trader | Saxo Trader | C2 Trader Peugeot: Peugeot Trader | 106 Trader Enthusiast: Saxperience


Go Back   Saxperience - Citroen Saxo Forum > Citroen Saxo Related Forums > Saxo Engine/Performance

Saxo Engine/Performance If you're interested in tuning Saxo engines, or if you need to know something which is engine related... this is the place for you.

Reply
 
Thread Tools Display Modes
Old 23rd July 2020, 12:06   #1
sri_130
Frequent Poster
Track / Motorsport Prep
 
sri_130's Avatar
 
Join Date: Apr 2012
Location: Doyncaster
Posts: 716
iTrader Score: 1 (100%)
Default 16v Crank Pulley

I used to rock an OEM style pulley. The one with the rubberised goo that connects the actually pulley to the inner bit that bolts to the crank.

Somewhere along the line, I switched to a solid pulley. Some billet thing, but I can't think why I did that.

The rubbery bit must be some sort of harmonic balancer? so would be of more benefit than a solid one?
My crank has had to be ground and the journals were scarred after only 200 miles on a turbo build. Wondered if this pulley might have contributed to that. It was all shiny and new before.
sri_130 is offline   Reply With Quote
Old 24th July 2020, 13:52   #2
welshpug
Saxperience Forum Bum
Track / Motorsport Prep
 
welshpug's Avatar
 
Join Date: Jul 2010
Location: South Wales
Posts: 3,030
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
iTrader Score: 1 (100%)
Default

they are a harmonic balancer of sorts however they will have little effect on a small petrol engine really, certainly wouldn't cause any bottom end issues on a TU from beign a solid lighter weight item.


where this can cause issue is on the more modern powerful Electronically controlled diesel engines as the power events are rather more violent in them than a small petrol engine, especially at peak torque, hence the use of dual mass flywheels as well to damp up the whole assembly, its well known for gearboxes to not last very long in some applications when a solid flywheel is used.


your bearing issues will have been caused by oil supply issues, be it low oil or oil surge, or cooked oil.
welshpug is offline   Reply With Quote
Old 31st July 2020, 20:15   #3
Chipwizards
Frequent Poster
 
Join Date: Nov 2009
Posts: 531
Default

It absolutely is a harmonic balancer, but it's main contribution to engine longevity is to reduce the impacts of torsional forces on the oil pump and chain. I have seen several high-revving engines with alloy pulleys break up the gears in the oil pump; TUs, XU10s and supercharged minis too.

If you've had bearing problems there's some other reason for it, but I'd recommend keeping the HB unless you are going dry sump with a belt drive.
Chipwizards is offline   Reply With Quote
Old Yesterday, 11:17   #4
Gabbastard
Saxperience Post Whore
Track / Motorsport Prep
 
Gabbastard's Avatar
 
Join Date: Dec 2002
Location: United Kingdom
Posts: 8,373
iTrader Score: 16 (100%)
Default

Id always assumed it was to damp the effect of the a/c unit kicking in and that was perhaps why the other engines had solid pulleys.
Gabbastard is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:23.