race wiring loom - Saxperience

solvi · 13th February 2012, 11:55

hi any one have made your race wiring loom??

im painting my car on indigo blue, and the are alot off wiring at engine bay!!!

i wollld like to cut them off...

anyone have already simplified a loom for the saxo??

thanks!

I´m not a l-plater anymore...now i´m infrequent poster..THANKS.

lolol BRUNO

Alex^p · 13th February 2012, 13:39

Standard ECU?
Sandy does race looms for the DTA, not sure if he does for others but worth giving him a try.

mark1311 · 13th February 2012, 16:22

i have an auto sprky work for me, hes rebuilding our entrie looms using muilty core cable and using the orginal pin, will find some pictures.

solvi · 14th February 2012, 20:13

thanks for the info....next week will start mouting the engine...will give a look at the wiring think...

slammed106 · 15th February 2012, 21:02

It depends how extreme you want to go..

If its just a thin out of the std loom and re-wrap then a few hours with a wiring diagram should be enough..

Mines currently away having it all remade as the stalks have all been ditched and im running a digital dash and im useless with electrics!!

Jungle · 16th February 2012, 08:59

I'm confused what are you asking?

Can you cut unnecessary wires? YES

Can you rip everything out and have a custom loom made? YES

axsaxoman · 16th February 2012, 09:30

is this road car -does it need lights .heater ,dash lighting etc
or pure race car ecu loom +charging circuit .
i see you are from portugal --I,m sure a car electrican can make up what you want

solvi · 16th February 2012, 23:00

its a tracl only car...no head lights,etc it whould be easyer if i get a pre assemble one.

i just nead a lighter and easy lomm....i gone try to cut the wires by myself.

tnx

AlexFocusST · 20th February 2012, 05:55

Is it worth it thought?
I would guess it's not , if you only want to take out light and indicator wires.

Personally i'm going to move all fuses in car , move battery to rear and tidy up the engine loom by removing the crash sensor barrel ( dont know how its properly called ) and placing main cut out switches

solvi · 9th March 2012, 00:29

hello , i nead help..

in the painting process i took all wires out ,mouted all again but the car dont start,
i see a indicator on the dash whith a key!! imobilizer!

and now? there are a way to bypass yhe imo??

i dont nead key in this car anyway...

thelooneytuner · 14th March 2012, 18:26

It depends on how far you want to go matey. I spec looms up to match people's needs. I'm currently doing one on marks and have multicore on the internal looms.
This makes everything neat and tidy.
Plus I use new pins on the origional plug so everything looks "made for"

solvi · 15th March 2012, 19:50

i ve managed to do it myself....bean working on the car for the last says !
still not starting but has a lot off wire mods ive relocated the ecu and fuel pump relays.