Saxo Brakes / Suspension / Transmission / Tyres If you have queries or information to share regarding Saxo braking, suspension, tyres or transmission systems, please discuss this within this forum. |
|
9th April 2018, 12:28
|
#1
|
L-plater
Join Date: Jan 2018
Posts: 58
|
Better handbrake for turns in Citroen Saxo VTS
Hello Saxperience
Since I'm going rallying in my Citroen Saxo 98hp from 2001 VTS I have realised my handbrake is no good.
We're doing alot of handbrake turns and the handbrake needs 7-8 clicks before it blocks the wheels,
Anyone know an idea for better handbrake in the saxo? I have adjusted the cable but it is loosing really quick..
Im running Nankang NS2R wheels and standard brake,
Would DS2500 brake pads perform better handbrake turns?
|
|
|
9th April 2018, 17:41
|
#2
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by steffeen
Hello Saxperience
Since I'm going rallying in my Citroen Saxo 98hp from 2001 VTS I have realised my handbrake is no good.
We're doing alot of handbrake turns and the handbrake needs 7-8 clicks before it blocks the wheels,
Anyone know an idea for better handbrake in the saxo? I have adjusted the cable but it is loosing really quick..
Im running Nankang NS2R wheels and standard brake,
Would DS2500 brake pads perform better handbrake turns?
|
Either fit drums or get a hydraulic handbrake.
The handbrake is designed for parking, and on the disc variant it's absolutely terrible no matter what you do to it.
__________________
The rain kept a trollin'
|
|
|
9th April 2018, 18:47
|
#3
|
Saxperience Forum Bum
Join Date: Mar 2009
Location: Stoke-on-trent
Posts: 2,640
Car(s): Mk5 Golf GTTDI
Mk2 VTR Project
|
Yeah, best off fitting a hydraulic handbrake if you're gonna be pulling on it a lot otherwise you'll just end up stretching the wire or breaking it off.
|
|
|
9th April 2018, 20:40
|
#4
|
Infrequent Poster
Join Date: Mar 2018
Location: Wirral
Posts: 151
Car(s): 106 GTI -
106 GTI shell -
New 106 Rallye shell
|
Hydraulic handbrake is the only way! another interesting fact....one of my drinking buddies is an MOT tester and has recently been on refresher training and pointed out that testers are now paying extra attention to Rally / track vehicles, specifically handbrakes! for many years i have had Mk1 & Mk2 escort rally cars with hydraulic handbrakes and had no issues as even the MOT tester was satisfied that it had a mechanical latch to hold the hydraulics on, however, i am informed that the vehicle must have mechanical means of holding the handbrake.
I am currently building a 106 Gti track / sprint car that will be used on the road so i will be installing the standard handbrake including cable mechanism (the lever will be shortened to give additional space for my hydraulic unit) to avoid any issues during the MOT.
Here is my current set up.
Last edited by karl_mh; 9th April 2018 at 20:48.
Reason: change pics
|
|
|
10th April 2018, 07:19
|
#5
|
L-plater
Join Date: Jan 2018
Posts: 58
|
Thx guys, I really want a hydraulic handbrake - but it is not allowed in the low end class as I'm currently running.
So I'm looking for improvement to the handbrake as standard.
|
|
|
10th April 2018, 14:32
|
#6
|
Saxperience Forum Bum
Join Date: Jul 2010
Location: South Wales
Posts: 3,074
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
|
use Drums.
|
|
|
10th April 2018, 14:33
|
#7
|
Saxperience Forum Bum
Join Date: Jul 2010
Location: South Wales
Posts: 3,074
Car(s): ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.
|
Quote:
Originally Posted by karl_mh
the vehicle must have mechanical means of holding the handbrake.
|
this has always been the case, never has a latch on a hydraulic cylinder been acceptable.
|
|
|
The Following User Says Thank You to welshpug For This Useful Post:
|
|
10th April 2018, 15:44
|
#8
|
Frequent Poster
Join Date: Apr 2012
Location: Doyncaster
Posts: 783
|
secondary rear calipers.
|
|
|
10th April 2018, 19:36
|
#9
|
Infrequent Poster
Join Date: Mar 2018
Location: Wirral
Posts: 151
Car(s): 106 GTI -
106 GTI shell -
New 106 Rallye shell
|
You are correct welshpug! What I was trying to say is that I've had my escorts MOT'd by many different MOT stations over the years and had no issues with the hydraulic unit with the mechanical latch that was fitted although the regulation (as you mention) was already in place. As with my 106...I have the the original mountings still in place so I'm installing the origonal set up to avoid disappointment at the MOT station
|
|
|
11th April 2018, 09:02
|
#10
|
Regular Poster
Join Date: Sep 2015
Posts: 269
Car(s): 106 Rallye
|
Quote:
Originally Posted by sri_130
secondary rear calipers.
|
I was going to say fit front calipers on the rear, or go drums and get used to changing the cable often when you stretch the life out of it.
|
|
|
12th April 2018, 08:52
|
#11
|
L-plater
Join Date: Jan 2018
Posts: 58
|
It's not allowed to modify the original brakes, only fit new disc / pads.
That's why im looking for some better brakes which would grip better for the handbrake. I was thinking EBC yellowstuff or Ferodo DS2500/DS Performance
Or does anyone have an alternative?
The brakes should be for short circuit runs with alot of time not braking so the operating temperature is not high all the time
|
|
|
12th April 2018, 17:44
|
#12
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by steffeen
It's not allowed to modify the original brakes, only fit new disc / pads.
That's why im looking for some better brakes which would grip better for the handbrake. I was thinking EBC yellowstuff or Ferodo DS2500/DS Performance
Or does anyone have an alternative?
The brakes should be for short circuit runs with alot of time not braking so the operating temperature is not high all the time
|
What's the definition of "original"? Normally that means you can use original equipment only, which means you could fit a standard drum setup.
details of series and regs pl0x
__________________
The rain kept a trollin'
|
|
|
13th April 2018, 08:08
|
#13
|
L-plater
Join Date: Jan 2018
Posts: 58
|
Quote:
Originally Posted by MartinObviously
What's the definition of "original"? Normally that means you can use original equipment only, which means you could fit a standard drum setup.
details of series and regs pl0x
|
The series im running is Class 1 rally in Denmark which is light rally with street cars (My class). The car should be a legal road car so I can fit everything original (Brake sizes etc).
Drums could be an option, how much work is there to fit drums instead?
Bigger brake disc, engine changes like turbo and so on is not allowed.
|
|
|
The Following User Says Thank You to steffeen For This Useful Post:
|
|
13th April 2018, 08:09
|
#14
|
L-plater
Join Date: Jan 2018
Posts: 58
|
The serie is called Klubrally Class 1 (Beginner) and you can drive in that class for 2 years to gain experience with rally before going further into the sport.
|
|
|
The Following User Says Thank You to steffeen For This Useful Post:
|
|
14th April 2018, 19:33
|
#15
|
Saxperience Forum Bum
Join Date: Dec 2012
Location: Perth
Posts: 3,663
Car(s): Peugeot 106 1.1 Turbo
Peugeot 106 1.5D Turbo
Peuge
|
Quote:
Originally Posted by steffeen
The series im running is Class 1 rally in Denmark which is light rally with street cars (My class). The car should be a legal road car so I can fit everything original (Brake sizes etc).
Drums could be an option, how much work is there to fit drums instead?
Bigger brake disc, engine changes like turbo and so on is not allowed.
|
To fit drum, you can either swap the whole axle to a drum style - which isn't a lot of work really.
OR you get the drums, back plate, shoes etc and the shorter stub pins. The stub end has a dimple so you can hammer out the longer, with a drift, ones for disc style.
The shorter drums ones simply hammer in.
few hours work.
__________________
The rain kept a trollin'
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 06:29.
|