racelad enclosed air filter help!!!

[gordy43]

hi there ive just got my raceland enclosed from kam racing an i was just wondering has anyone got any pics or instructions on how to fit it cos in the box there is loads of little sponge type pads an i havnt got a clue what there for all the help needed thanks cos iam quite new to modding

i have a vtr 2000

[Anders0n]

I got mine today aswell. I'd like to know how I'm supposed to attach it to the front...

[Badgersport]

The sponge stuff goes on the actual enclosure on the neck, where it meets the induction pipe. To stop any play, damage to the pipe. And as for attaching it i used a few L shape brackets on the slam panel and mines been all good.

Ste

[Anders0n]

The sponge stuff goes on the actual enclosure on the neck, where it meets the induction pipe. To stop any play, damage to the pipe. And as for attaching it i used a few L shape brackets on the slam panel and mines been all good.

Ste

Any chance of some pics?

[S34MER]

iirc the slam panel on the VTR and VTS is slightly different, so you'll have to cable tidy the end to the slam panel on the VTR.

[Japman]

i drilled holes through my slam panel,done the job

[Anders0n]

There's no holes at the front of the scoop though?

[S34MER]

*sighs*

either drill holes or..... don't put the bolts in the front 2 holes and put cable tidies in there instead!

[Anders0n]

*sighs*

either drill holes or..... don't put the bolts in the front 2 holes and put cable tidies in there instead!

Thanks. :clapping:

Who did you sell your alloys to in the end? Quite pissed off now I didn't buy em!

[gordy43]

thanks alot guys ill give it a go fitting it today an see how it goes fingers crossed