piper cams

[shaunbm]

......

[SaxoAL]

easy of fitting: NO!
DIY, no! not unless you can take apart and rebuild top end the engine, and have the right tools to do so aswell.

[Scott]

what engine is it? basically if its anything other than a vts the head really ahs to come off, which means new head gasket and bolts, and in either case the timing will need set to

[AdamH]

timing up a engine is easy (gwon college) smileys/smiley4.gif get it to tdc aat flywheel or pulley/rockers start car up without dizzy to see rotation... work out firing order (normally 1,3,4,2) but best to check the haynes manual.. put ht leads on makin sure which one.. is one... left to right or right to left.. if car dont start swop ht leads 180 degrees as you may have it on the exhaust stroke instead of inlet smileys/happy.gif if it starts up and u have a moveable dizzy, get a erm.. strobe light think that flickers when a spark goes thew ht leads... and time it so its by the line on pulley :O