throttle bodies

[tommy_vtr]

just bought myself some gsxr600 throttle bodies for my vtr, comes all on manifold etc with all the pipes just wondering wether ill need to do anything to my ecu, fuel pump etc, if anyone can help me ill be glad?:afro:

[stevenet15]

wont run on standard saxo ecu as it is, iirc a dastek piggyback is able to run them but for best results you need standalone engine management which is £500-£1000 and then it will need wiring in and then mapping which will be another £400-£500. Give GMC a call and have a word with them as they supply and fit throttle body kits

[RCD-Performance]

As Steve said, you'll need aftermarket fuel management.

Although there not as exspensive as steve points out. Our system comes in with a lot smaller bang on your wallet.

We can also fit your bodies if you run into any problem

Have a read of our section

Ross
RCD.

[Coonper]

Are these the throttle bodies that were on ebay for £160?

[KamRacing]

pay the extra for a proper manifold to which you can mount the throttlebodies to. Silicon hosing is not good as it upsets the airflow

[AXracing]

If you are trying to t body a VTR I have a full kit from GMC that I am selling for next to nothing and they work a dam sight better than a botched up kit.

[vts-yes]

^^^ how much bud? pm me asap.

[tommy_vtr]

hi people erm yeh just bort them off ebay for 125 quid, yer im thinking of a remapped ecu etc would that work? im hoping to fit all new parts at once, goin to buy a manifold, cam and port and polish head etc. erm ive got a video of them in action on the car!

http://youtube.com/watch?v=CP5q2l_xEKo

thats them

[tommy_vtr]

AXracing you could pm me a price and pics please thanks

[AXracing]

^^^ how much bud? pm me asap.


Open to offers.

[AXracing]

hi people erm yeh just bort them off ebay for 125 quid, yer im thinking of a remapped ecu etc would that work? im hoping to fit all new parts at once, goin to buy a manifold, cam and port and polish head etc. erm ive got a video of them in action on the car!

http://youtube.com/watch?v=CP5q2l_xEKo

thats them

Are they Tbodies or carbs and what did he give you with them?

[tommy_vtr]

pics? what does it include?

[tommy_vtr]

Set of GSXR600 Throttle bodies or carbs in clean used condishon
(They are currently carbs due to the injector holes being blocked with hard setting putty as its not a part which gets very hot in the engine, however this is only temporary and can be pushed out to convert back to throttle bodies)

Ok, i have these forsale due to no longer needing them as i sold my car, they are in very clean and tidy condishon, used with a few marks, but very clean, they also come with a manifold to fit peugeot 106, Citroen saxo, Citroen AX 8v TU engine's and samco hosing and jubilee clips to connect the bodies to the manifold. The manifold is a bit rough and ready as the guy i bought them off made it himself i think, but it works as he had it on his ciroen ax gt untill he sold them to me (think there may even be videos of it on youtube under "citroen ax on bodies" its a black car).

I have no idea what else will be needed to run these, other than possibly a standalone ECU, but there is the possibility they will run on standard managment, it is up to the buyer to find out about this and confirm suitability...etc

There will be a BHP gain from fitting these due to removing the restrictive standard intake manifold and filter setup...etc the power gain varies on the car,engine...etc



thats the right up on them

[AXracing]

I have to fly away in about a hour today but if any one wants pics of the GMC parts I have just send me a PC and I will get back to you in about a week when i get back in the UK.

[AXracing]

Tommy they are carbs and not throttle bodies you have sold. There really only anygood for a precat car. You will have to get them setup for your engine.

[tommy_vtr]

yer im goin to get it all setup before hand neway im not just going to wack them on and hope for the best like.

[tommy_vtr]

it say in the descripton this to fit peugeot 106, Citroen saxo, Citroen AX 8v TU engine's and samco hosing and jubilee clips to connect the bodies to the manifold. what the tu mean? wil it fit my silvertop engine

[RCD-Performance]

post a couple of pics up mate, see what you've actually got in that "kit"

[KamRacing]

get a picture up. Sounds like the Shenpar kit?
TU engines are the code derivative of the engines that are fitted. TU's were fitted to small capacity 205's and the 106/saxo range amongst others. XU engines were the bigger engines - 205 gti, 306 xsi and gti-6, Then moved to EW engines in the 206 and 406 etc, can't say i take any interest in the newer cars though now so have no idea on their numbering