Anyone interested in VTS engine stainless bolt kits?

[AlexR]

I know it's pretty easy to get hold of these bits but i can only buy in bulk(bags of 100) but i can do A4 or A2 stainless high tensile(12.9) bolt & washer sets for VTS engines.
These will stay shiny and won't rust, ever. A4 stainless is over the top but if you want it i can supply it. They are also considerably stronger than standard bolts which is why i use them, they don't rust into stuff, and if you do them up too tight they don't snap. I use them for anti roll bar plates for this reason.
Includes:

Stainless bolts for cam covers(16), coilpack(4) and coilpack cover(6), manifold to head(8?), manifold heatshield(5). Rear anti roll bar plates(2), torsion bars(4)

Plus any other bolts, washer and nuts you want. Do everything in stainless. Or if you like black we do black mild steel ones for a lot cheaper.

These will be the correct length as std, in proper full stainless not just coated, i have left some of these bolts out in the rain for weeks and they are still just like new.

Choice of button head or hex cap

http://img-europe.electrocomponents.com/images/C209993-63.jpg

http://img-europe.electrocomponents.com/images/C280981-63.jpg

No set prices at the moment, this is a favour to you guys, i will only really sell sets as it's not worth my time to sell them otherwise. Bear in mind cost price for a bag of 100 cam cover hex cap bolts is approx £30 in A2, and £50 in A4 :omg:

I'll make a rough guestimate that cam cover and coilpack ones will come to £8+P&P with no profit for me, torsion bar and arb ones will cost about £3.50+P&P. Obviously i want people to give me something for my time, as i earn plenty doing normal work, this is a favour?! Add a bit for stainless washers too. Gonna cost around £15 for a set i reckon.

[frankie]

how much for:

kam covers
coilpack
and coilpack cover

[AlexR]

Probably around £10. I'll have to order some sets, i'm gonna do an order for a load of stuff tomorrow, will work out how much exactly it's cost me for each kit, then work out price of postage and give a definite cost. Sound fair?

Anyone who lowers their rear suspension should 100% use this kit, no hassle rounding off torx bits or snapping arb plate bolts ever again, and they stay blingy and shiny forever!

[Simon]

Anyone who lowers their rear suspension should 100% use this kit, no hassle rounding off torx bits or snapping arb plate bolts ever again, and they stay blingy and shiny forever!

My vtr will be lowered on the 24th :d

Could I have price for the ARB plates + torsion bars

Thanks

[AlexR]

Should be under a £5er delivered in theory, as i said i need to work out costs, just seeing if people are interested first :)

[jpsaxo]

I'll have some off you Alex, will catch you on msn now pal :y:

EDIT:

PM me how much for

cam covers(16), coilpack(4) and coilpack cover(6) cheers mate

[AlexR]

Got enough to make a good 10 batches of black cam cover ones, and enough stainless to do 15 coilpacks and coilpack covers plus all stainless washers. Can do red, blue or silver anodized washers too but they are $$$$$$$$$$

[pjm300]

fag, price me up for some blue anodised ones.

can you get anodised t clips for braided hoses?

[jpsaxo]

Got enough to make a good 10 batches of black cam cover ones, and enough stainless to do 15 coilpacks and coilpack covers plus all stainless washers. Can do red, blue or silver anodized washers too but they are $$$$$$$$$$

Nice one mate, let me know how much i owe you :y:

[Toad]

I'm interested Alex, as I've got a few missing from my coilpack covers anyway.

I'd like the following in black, and the shape of the bottom pictured one please:

Set for coilpack, coilpack covers, cam covers and rear ARB end plates.

Many thanks. :)

[SaxoVTRacer]

VTR BOLTS exhaust manifold with hex head
how much as fitting a tublar one soon
ps a price for any other bolts u think necessary

[AlexR]

Kits - All in socket head(bottom pic) Stainless is A2 grade(stable to 700degC), Black are Steel coated with shiny black stuff. All high tensile 12.9, most std stuff is 8.8 or 10.9.

Stainless - 16 Stainless M6 Cam cover, 6 Black M6 Coilpack cover, 4 stainless M4 coilpack, 16 stainless M6 washers, 4 M4 washers = £7.50 delivered

Black - Same as above but with black cam cover bolts, no washers cos can't get them in black - £4 delivered

Will put up prices for the other stuff tomorrow.

Sets available from tomorrow, can do other variants ie stainless coilpack cover bolts, whatever.

One ok pic to give an idea:

http://img.photobucket.com/albums/v241/kneaster/Picture107.jpg

[Gabbastard]

Chrome pimp.

[pjm300]

got any details on the anodised stuff mate? :)

[AlexR]

Anodised are way too expensive, you know where i get them, just knock 25% off and i'll do them at that price :) Appears to be 80p per bolt plus vat, and they only do blue in 10mm long(that includes the head), red come in 20mm long which is right, again £1 per bolt...

Aiii David, chrome rocks. I'm loving the black ones though.

[jpsaxo]

Anodised are way too expensive, you know where i get them, just knock 25% off and i'll do them at that price :) Appears to be 80p per bolt plus vat, and they only do blue in 10mm long(that includes the head), red come in 20mm long which is right, again £1 per bolt...

Aiii David, chrome rocks. I'm loving the black ones though.

Black ones rock ;)

[pjm300]

Anodised are way too expensive, you know where i get them, just knock 25% off and i'll do them at that price :) Appears to be 80p per bolt plus vat, and they only do blue in 10mm long(that includes the head), red come in 20mm long which is right, again £1 per bolt...

Aiii David, chrome rocks. I'm loving the black ones though.


ok mate, ill have a look through the catalogue when im in work tomorrow :D

[ryhornvtr]

I think you have just sold me ones for a rear beam. How many bolts will i need and how much?

Im hopefully getting mine lowered on the 16th so can you supply me any bolts ill need before then?