Raceland induction kit?

[smearsvtr]

Basically i have a w plate 2000 90hp vtr. At the min i have a kn 57i kit but am soon looking to replace it with the above with a green filter. Now then on the induction pipe i have to breather pipes going onto it one from the rocker cover and other from back of thottle unit. Now the question is does the Raceland kit incorparate the connector for the rear breather pipe?

[manc]

Hi,

No the raceland enclosed induction wont, it only has one breather input on the side.

I also have two breather pipes, I have put another breather filter witha joiner onto it and tied it back with a tiewrap, will dig out an image if I can.

ManC

images as promised, around the back of the top silicon hose you can see a elbow hose joiner that it where I have tied back the second breather pipe: -

http://www.zen16052.zen.co.uk/saxo/bmc_fitted2.jpg
http://www.zen16052.zen.co.uk/saxo/bmc_fitted1.jpg

[smearsvtr]

cheers m8 was thinkin of using the plastic port off me old hose or use me old hose