BMC CDA Carbon filter

[martinmac]

alright ppl! I have a saxo vtr mk2, and my mate has offered me his BMC CDA Carbon air filter, problem is, it came off a punto GT and it comes without the hosing/ fittings. So its basically just the filter. Soooo will it fit to my car if i get the required parts? anddd Where would i be able to get the required parts to fit it? Any help would be appreciated. Cheers!

[Steve]

the box itself its technically universal, should be able to get all piping for it to fit

[martinmac]

cheers for that... u or any1 else know where i can get the parts required to fit it to my car? Cheers

[evans1089]

just piping, clips and a bracket or two ;)

[martinmac]

any piping? or like a silcone elbow ? just find a hose with the same diameter as the filter? then clamp it on with some brackets? n wallah? lol
jus want to get it fitted to compliment the full magnex system i purchased for a bargain 65 quid :p ... second hand but in top notch condition ;)

[jam_vts]

not sure on VTR but on my VTS- had to get 90 degree silicon hose which is 63 mm or 68 not sure exactly(doesnt have to be silicon) + i needed a breather filter, and some hose clamps. Cold air feed as well if you wish to pursue that route

[martinmac]

agen cheers.... all the info helped! will look a bit more into gettin it fitted defo now that i know for sure it can be done! will get all the required measurments n have a go. And yeh i would go for the cold air feed too ... cheers :y: