E-TECH brace

[moxy89]

Will this be a striaght fit to my mk1 saxo, will i need to move anything,and also do i need anything else such as fixing or do i use my standard ones, help with be repped as im cololecting very soon cheers

[Sean]

you may have to take off the bonnet stay so the bonnet will close properly, and possibly move the cut-off switch but i'm not 100% if you have to do this with the e-tech. It's easy enough to just fit the brace and then you can have a look yourself.

[moxy89]

will i need different fixings or can i use the ones already as im buying it second hand

[Sean]

the existing bolts will be fine

[RedB]

Wont need to relocate or use anything else apart from the standard bolts as its an E-Tech :y:

Only sparco and raceland items need simple mods to fit :)

[stendog]

mox if you dont want to fit it come over mine and il do it for you mate

[Predator_R32]

should go on without any problems :y:

[Adam_Q]

Its an easy fit fella! Here's mine fitted to the mk2 vts

http://i167.photobucket.com/albums/u145/adz21/31052008027.jpg

[piggy123]

not the best performance wise by a long shot but better than nothing and yes should fit with no problems at all!

if you want a better one performance wise look at OMP

hope this helps