PDA

View Full Version : VTS throttle inlet diameter?

tommyVTR
8th July 2008, 20:48
HELP!

- WHATS THE DIAMETER SIZE OF THE VTS THROTTLE INLET?
- WHATS THE DIAMETER SIZE OF THE STANDARD AIR INLET OFF THE SLAM PANEL?

Before you all post saying 'search' i have and i cant find a straight answer, i would go out and measure but its getting bit dark to go taking my feeds off and mess about with a ruler.


This is the induction kit i have which im intending to buy silicone hosing for...

http://i19.photobucket.com/albums/b157/stevecnet/VTS%20Progress/rebuild4.jpg


extra question*

if the measurement was to be 63 do i add a 6mm on the silicone order if the thickness is 3mm? worried i might get a tight fit or loose but people say jubilee can account for acouple of mm out.
kezajones
8th July 2008, 21:10
if im reading right and the O.D of the throttle body is 63mm then you want to order silicone with an internal diameter/I.D of 63mm
tommyVTR
8th July 2008, 21:20
if im reading right and the O.D of the throttle body is 63mm then you want to order silicone with an internal diameter/I.D of 63mm

so is the diameter of the vtr and vts inlet the same? as all threads say the vtr 63mm
tommyVTR
8th July 2008, 22:05
bump, anyone?
Lozza_vtr
8th July 2008, 22:26
I always thought that the VTS throttle body diameter was larger than the VTR. I know that my VTR one is 63mm for sure, because i had to get some silicone with a internal diameter of 63mm.
Ferg
8th July 2008, 23:04
I need to know this as well tbh...
frankie
8th July 2008, 23:08
76mm........i belive
tommyVTR
9th July 2008, 14:26
Just called up Hose Direct in Doncaster, going there Saturday £15!!! for a 90 degree reducer :P:P CHEAP AS CHIPS.

engine bay should look the sex soon.

76mm thats 13mm bigger than the vtr then, im gonna measure myself tnite just to clear the air.
Ferg
9th July 2008, 14:58
Tommy could you let me know what the exact measurements are when you know because I need to order a 90 degree samco for my CDA as well.
tommyVTR
9th July 2008, 18:18
no worries chief, decided not to tonite as its raining quite heavy... as soon as i get a chance during dry weather ill pm you the measurements.
Ferg
9th July 2008, 23:51
Cheers dude... much apprecitated!
NaughtyBoy
10th July 2008, 02:21
no worries chief, decided not to tonite as its raining quite heavy... as soon as i get a chance during dry weather ill pm you the measurements.

Are you using a 70-130 CDA? If so a 70mm 90º Samco will do the job, I´m using a 65mm 90º Samco hose with an universal CDA from Raceland, OD of the CDA is 65mm, i believe OD of the TB its around 70mm